Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I seem to remember reading that you should turn off lens image stabilization when using on camera flash? Is that right? If so why?

share|improve this question
    
That's the first time I am hearing this. –  abhi Oct 13 '10 at 12:55
add comment

6 Answers

up vote 2 down vote accepted

Generally you can turn image stabilisation off when you use a flash, beacuse it doesn't make any difference.

Some possible exceptions are when the flash doesn't really light up enough so that you still need a longer exposure, or if you are using a long exposure in addition to the flash to catch the background light.

share|improve this answer
3  
That's true only if the flash is your main light source. As soon as you have significant ambiant light and long exposure, stabilisation is a good idea. –  Guillaume Oct 13 '10 at 10:52
2  
It would also depend on your focal length. If I were using a stabilised 100mm, and an exposure of only 1/60th, I'd want to keep stabilisation on –  Rowland Shaw Oct 13 '10 at 11:54
add comment

That's not advice I've heard -- you would turn image stabilisation off when using a tripod though, as you can otherwise get a feedback loop.

share|improve this answer
    
@Matt Very true, although you still obviously don't get any benefit when tripod mounted. –  Rowland Shaw Oct 13 '10 at 12:48
1  
That applies to older first generation IS systems, the new ones are clever enough to realise they are on a tripod and not do anything. The manual should tell you whether you need to turn IS off when using a tripod. –  Matt Grum Oct 13 '10 at 12:48
    
I've never used IS, so I'm just curious...feedback loop? Sounds like an audio issue. What do you mean by feedback loop? What does it do? –  Rob Clement Oct 13 '10 at 16:31
    
@Rob same principle as audio - the IS movement generates vibration, which the IS then cancels, then the IS tries to cancel that movement etc... –  Rowland Shaw Oct 13 '10 at 17:28
    
Ahh. Got it thanks. –  Rob Clement Oct 13 '10 at 18:28
show 1 more comment

There's no reason image stabilization and flash should interfere with each other. If you want to benefit from IS keep it on. (However, IS might make things worse when you're using a tripod, as Rowland says.)

share|improve this answer
add comment

You want IS on when your shutter speed is slow enough that camera shake could affect your photo, and when your camera is not securely mounted (ie, a tripod).

If the use of flash causes your shutter speed to increase enough that there's no danger of camera shake, then you no longer need IS. In other words, there's a direct relationship between shutter speed and your need for IS (taking focal length into account). Flash is part of the equation only as it relates to its affect on available light, and thus, your shutter speed (unless I'm missing something, here).

As Matt indicated, just because you don't need IS on any given shot doesn't necessarily mean that there's any harm in having it on.

share|improve this answer
add comment

You might want to keep IS turned on when using studio flash heads. Whilst hot-shoe flash durations are very fast (1/1000s and up) and pop-up flashes even faster, bigger mains powered strobes can be more like 1/200s or longer when on full power, so you will probably benefit from IS unless you're shooting normal to wide angles.

share|improve this answer
add comment

The only argument I think of is to save battery life.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.