Alley in Pisa, Italy

by Lars Kotthoff

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

Why is on sensor PDAF drastically slower than traditional PDAF? I assume the technology is the same, doesn't matter if the module is on the sensor or located behind a mirror. But the performance is not even close.

share|improve this question
add comment

2 Answers 2

up vote 5 down vote accepted

The technology in theory is similar, but the implementation isn't exactly the same.

Without knowing exactly which model, or even which manufacturer made your camera, it is difficult to be very specific. There's a large difference in performance between different models and lenses.

It always starts with light, so let's begin there. The amount of light used by each pixel of an on-sensor PDAF array is much less than the amount of light used by each pixel of a dedicated PDAF array.

  • The dedicated PDAF sensor pixels are several times the size of, and thus more sensitive than, the pixels in the image sensor. The light falling on them is gathered from an even wider area through the use of the splitter and micro-lenses between the reflex mirror and the focus array.
  • The pixels in most cameras with on-sensor PDAF have a Bayer filter or other form of color filter over the light wells. This means two thirds of the light that falls onto a pixel doesn't make it into the light well. Traditional PDAF sensors are monochromatic, so there is no need for any color filters.
  • Getting the data from the sensor is another potential speed bump. Since the data from a dedicated PDAF sensor is gathered from lines only a single pixel wide, the data can be read more quickly than that coming off a full sensor that is also being used for metering and possibly WB computation as well.
  • Most cameras with PDAF use a hybrid form that includes elements of both PDAF and CDAF. Any CDAF system requires more stages than a PDAF system as it is a "move and measure" system that repeats the process until it finds the distance that produces the most contrast. A PDAF system can measure once, determine how far and in which direction the lens is out of focus, and then move the lens. A CDAF system must take at least two measurements to determine which direction to move the lens to get more contrast, and then must sample until the lens has moved past focus and contrast begins to fall off.
  • The half-silvered portion of the main mirror that all light falling on a dedicated PDAF sensor array must pass through does reduce the light by 50%, but even with this loss the dedicated sensor is still getting much more light per pixel for the same amount of light entering an equivalent lens.

Having said all of that, I highly suspect another big reason for the difference lies in the design of the lenses attached to the respective cameras. With traditional DSLRs, PDAF speed can vary quite a bit on the same body depending on the lens being used. The focus motors on lenses designed for the typical on-sensor PDAF cameras are more comparable to consumer grade DSLR lenses, and even fixed lenses on bridge cameras, than to higher end DSLR lenses. Overall design, weight of the elements being moved, the size and type of motor used to move the lens, and the firmware that controls it all have an influence on the overall speed and accuracy of the lens' mechanical focus system. If the on-sensor PDAF camera is even capable of interchangeable lenses, there may be faster lenses (aperture and focus drive) available for a premium. Remember that aperture is figured on actual, not effective, focal length. Some of the cameras in question, like the Fuji X100S, have APS-C sized sensors. When this is the case the aperture sizes are comparable to lenses used on APS-C DSLRs. But other cameras like the Nikon 1 series have 1" sensors with barely half the linear dimensions and less than 1/3 the surface area of an APS-C sensor, not to mention that they are dwarfed by the 7.5X larger 36X24mm full frame sensors. When comparing the lenses for these cameras, the absolute size of the diaphragm is smaller for a given f-number and angle of view because the focal length for that same angle of view is shorter. The mass of the optics in such lenses is less than that of more typical faster focusing DSLR lenses, but the space available for the motor that drives the movement of those optics is also much less.

Thanks to jrista for the information in his comments regarding this answer. Much of the correct information on this heavily revised answer is his. All of the mistakes are mine. B-)

share|improve this answer
    
I also suspect that on-sensor PDAF has fewer and less sensitive focus points compared to the dedicated sensors. I fully expect on-sensor PDAF to improve quickly though, possibly approaching the performance of the dedicated sensor, at least in good light. –  Chinmay Kanchi May 2 '13 at 17:23
    
The number of focus points doesn't affect speed that much. In fact the more points there are, the more data has to be processed before the camera makes a decision. This is offset by the fact that the cameras with the most focus points generally also have the most powerful processors. It is mainly about the amount of light and the speed of the mechanics of the focus system in the lenses. –  Michael Clark May 2 '13 at 17:26
    
According to your answer, on sensor PDAF is unlikely to improve? It will never be monochromatic? –  erotsppa May 2 '13 at 17:31
2  
Good answer. The one thing I strongly suspect that affects on-sensor PDAF is that the distance between measuring sites is too tight. With a dedicated sensor, the distance between sites measuring phase are spread at irregular intervals which depend on the maximum aperture they are able to focus with. –  Itai May 2 '13 at 17:38
1  
An article I read on dpReview says they are green on the Fuji X100S. dpreview.com/news/2010/8/5/fujifilmpd –  Michael Clark May 3 '13 at 7:40
show 8 more comments

Traditional phase detect autofocus system runs mainly in an open loop configuration: take measurement, send focus distance to lens. Contrast detect autofocus is closed loop, it has to take a contrast measurement, move the lens, take a contrast measurement, move lens etc. which is clearly much slower.

The reason phase detect on sensor isn't nearly as fast as a dedicated phase detect unit is simply that it isn't accurate enough to use in open loop mode, so the camera has to take several measurements to fine tune the focus.

The reason for the difference is accuracy is that a dedicated phase detect system has a series of lenses to direct the incoming light to two pixel arrays that are wide apart in order to measure the difference in phase and therefore the angle of incidence which tells you how far out the plane of focus is.

Phase detect on sensor uses a series of special pixels that have have an opaque mask over one half. By measuring the difference in light reading from pixels which have the left side blacked out compared to those which have the right side blacked out you get a measure of the angle of incidence but it's not very accurate as the height of the microlens above the pixel is small, leading to a much shorter baseline. Baseline is key to accuracy, imagine shutting one eye and trying to judge the distance of something by moving your head, if you can only move your head a tiny amount it's very hard.

share|improve this answer
    
At least on Fuji's version, the pixels used are filtered for green. This article quotes Mr. Yamashita of Fuji regarding the design of the sensor. dpreview.com/news/2010/8/5/fujifilmpd –  Michael Clark May 3 '13 at 7:48
    
@MichaelClark fair enough, I'm sure a saw something from another manufacturer stating they used clear filters for those pixels. –  Matt Grum May 3 '13 at 8:19
    
re: monochromatic pixels on some on-sensor PDAF cameras. I think I have too, but I couldn't find it today. I think the Nikon 1 series uses green also, but I've too many photos to edit right now to look for it. –  Michael Clark May 3 '13 at 8:26
    
+1 for explaining how on-sensor PDAF does baseline and 'phase' measurement –  Kaushik Ghose Oct 10 '13 at 19:18
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.