Open

by damned truths

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I am trying to use my T3i in M mode and also use live mode. I don't seem to get an image on the LCD screen unless I press the shutter button 1/2. As soon as I take the picture the LCD screen goes back to all black with a white rectangle outline in the center of the screen. I will be using the camera in an underwater housing and seeing the live view before I am ready to snap the shutter will be important to me.

share|improve this question
2  
Is your exposure set correctly when this happens? (That is, the pictures you take are well exposed?) –  coneslayer Apr 22 '13 at 1:36
3  
Have you previewed your photos? If they are black or dark your problem is almost certainly that your exposure is not bright enough. –  damned truths Apr 22 '13 at 1:37
    
Are you planning on using manual mode underwater as well? Ballsy! –  dpollitt Apr 22 '13 at 2:14
    
Could you post one of the images with the EXIF info intact? –  Bart Arondson Apr 22 '13 at 5:21

2 Answers 2

The Live View screen will by default try to 'mimic' the exposure you're likely to get with the settings you have dialled in. So in dim light with ISO 100, a fast shutter speed, and a small aperture, you will likely just see a black screen. When you half press the shutter the camera brightens it up while it meters the scene and so you can see what you're focussing on.

Next time you have this issue just try increasing the shutter speed up through 1 sec, 4 secs, 10 secs etc and you should see the brightness of the image on the lcd display increase.

In a way it's just telling you that your image will be seriously underexposed!! As you say, when you take the picture, it's just showing you a black screen again (the image preview).

So boost your ISO, use a larger aperture, use a longer shutter speed....whatever it takes to get the correct exposure for the environment you're shooting in :-)

share|improve this answer

I have a Canon Rebel T3 and when I turn it on say in auto mode the screen looks fine but when I switch the dial to any of the other modes a little more than half the screen is black and visa versa if I turn it on and the screen is half or more black on auto when I switch the dial to any of the other settings I get a normal full screen.Any idea?Thanks

Sorry my first time on this site and appearantly I put that in the comment section instead of as a question.It has been reposted as a question.

share|improve this answer
1  
that doesn't seem terribly relevant to this question, and it certainly isn't an answer. –  ths Oct 7 at 23:17
1  
Hi Terry. If you want to ask a question, please use the ask question link above. –  MikeW Oct 8 at 0:34

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.