Open

by damned truths

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

It started, bizarrely, with my CANON 650D freezing for a while. I tried turning it off and it wouldn't - I suspect I did this too soon after taking a photo and the card was still saving the data.

Now when I try using my camera it flashes a message saying there's something wrong with the SD card (which is 16gb). I've tried formatting it to the camera, but it was unable to.

Help!

share|improve this question
3  
What does it say is wrong? What is the exact error message? –  mattdm Apr 21 '13 at 12:05

4 Answers 4

Make sure the SD card isn't locked - making it a read-only SD card. I've tripped the SD card write lock putting them into my D7000 a few times.

enter image description here

share|improve this answer

Try fully erasing your card on the computer:

  • If you use Windows: Download the official SD Formatter, enable overwriting from the Options button and proceed to format the card.

  • If you use Mac OS X or most Unix variants: erase the card by running the following command with superuser privileges: dd if=/dev/zero of=/dev/{whole disk device identifier}. After it finishes, reporting an amount of input blocks/output blocks/average speed, remove the card and attempt to reformat it in-camera.

Both methods are destructive to any existing contents and will take quite a lot of time.

share|improve this answer

If it's brand new I would just save the time and go back to the shop and complain.

If you purchased it on ebay you may want to check: http://sosfakeflash.wordpress.com/2008/09/02/h2testw-14-gold-standard-in-detecting-usb-counterfeit-drives/

Sometimes, some Ebay SD card sellers sell a "16gb card" that actually only has maybe, 32mb", or some other small amount.

Basically, it writes data to the card to fill it, and reads it back. If something is missing the dodgy it is.

I've been stung by ebay cards before. I dare not trust them no more.

share|improve this answer
    
I used to have a few allegedly class 10 cards that are slower than mid-high end class 6 Lexar bundled with my camera, for that matter… –  Ryccardo Apr 21 '13 at 15:10
    
I've bought ebay cards that were perfectly fine, too. Be aware as with anything. In general, electronics retail stores charge about 150% markup on SD cards. You can usually get them for around half as much from computer parts retailers. I favour Sandisk (Ultra, Extreme or better, not "Blue"). –  thomasrutter Apr 22 '13 at 6:58

From the description you've given, especially the part about the camera failing to format the card, it sounds like there's just simply something wrong with your SD card, so that probably means throw it out and buy a new one. They aren't that expensive these days.

Even if you can get the card to work again, it's not worth continuing to use a card that you already suspect has problems.

It's a fact of life that some SD cards fail at random times, and sometimes this means they'll fail when they're quite new. Count yourself lucky that you haven't lost a bunch of irreplaceable photographs that were on it.

Before you throw it in the trash, however, a few simple troubleshooting steps:

  • Try another SD card in the same device. Same problem? Then it's probably the device, not the card.

  • Try the problem SD card in a different device. Any problems? Then it's probably the card.

  • Check for dust/dirt/fluff in the SD card slot of the device (camera) and on the SD card's contacts (avoid cleaning them unnecessarily especially with dry fabric, as static electricity is harmful to them).

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.