Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I know about two important reasons which are motioning or shaking camera/hands and dust and dirt on you lens but if you have fixed them and still you have blurred/non-sharp results, what can be the reason?

I am talking about DSLR Canon cameras and lenses.

share|improve this question
4  
Posting an image in your question as an example of what you are seeing would be helpful. –  Michael Clark Apr 18 '13 at 22:57
11  
Um, no it isnt. Blur is about as generic and non-specific a term as we have in photography. (And I've been shooting for forty years, some of those years as a pro.) –  user2719 Apr 18 '13 at 23:10
1  
@MichaelClark Whole the image! We say it blurred image in Persian when you have unclear and not high resolution results. When you zoom it you find it better but anyway they are damages even in a very small image. And another thing! It is not sharp enough and if you try to make it sharper by photoshop you will damage it more! –  Persian Cat Apr 18 '13 at 23:31
3  
Can you post a sample? Then we can see what you mean. –  mattdm Apr 18 '13 at 23:53
7  
Then this question is pointless! Q) What causes blur? A) Lots of things. –  Poldie Apr 20 '13 at 23:07
show 10 more comments

4 Answers

up vote 0 down vote accepted

uhhhh :p may be earth quake?? :p (really may be)

You see id like to know how old your camera is, and did you drop it or crash it at some point of time?

why i am asking is because, if you are cent percent sure that your tripod is stable then, the sensor may have become a bit shaky if in any of the above case...so no matter what shutter speed and stability you set, the photo might get blurred if the sensor inside your camera shakes....(even if the shake is like micro meter :p if the sensor is loosely held by the camera ) it may even shake due to tiny vibrations like mirror flip.

this is the only reason i could come up with as per your description. so i would prefer you taking your beloved camera to an authorized service center and giving it a full body check up :p :)

happy clicking :)

share|improve this answer
1  
About earth quake I am sure as I always was lucky about this case and far from from of the earth quakes! :)) but you are right! I am a little depressed about what has happened for my camera. I have to confess I travel a lot and it may caused some problems for my camera. My camera is almost 4 years old but my lenses are 7 years old. –  Persian Cat Apr 19 '13 at 8:26
add comment

The three primary contributors of blur and/or softness in most pictures are:

  • Camera motion
  • Subject motion
  • Incorrect focus

Additional contributing factors can be:

  • Narrow Depth of Field
  • Diffraction
  • Use of tilt/shift with a capable lens
  • Chromatic Aberration
  • Lens Distortion
  • Misaligned/Decentered lens elements
  • Misaligned lens mounting flange
  • Poor lens design/quality of construction
  • Damaged/Dirty lens elements or sensor

Fingerprints or dust and dirt on the lens need to be pretty bad before image quality is significantly affected.

share|improve this answer
add comment

Blur and softness can easily be confused. If the camera is truly stable and subjects stationary, there can still be softness which looks like blur. With most - more so on low-quality ones - lenses, you will get softness at maximum aperture and with all lenses you will get softness past the diffraction limit which cause blur at small apertures.

If you are seeing blur which cannot be attributed to lens softness, then something must be shaking. Even on a tripod, vibrations are possible. Cheaper tripods may not be stable and even pushing on the shutter can vibrate the camera and lens.

Another cause of blur is shake from the mirror or shutter. Not much can be done about the latter but the former can be avoided using mirror-lock on most cameras. Some cameras automatically engage mirror-lockup when the short self-timer starts.

share|improve this answer
add comment

You seem to use a canon 5d mark ii

If the image is of something at the same distance (ex: a wall?)

  • See if the micro-focus adjustement setting is on (and try turning it off)
  • or if it was off, try to turn it on and see if you can find an adjustment that correct the effect.

If the image is of things at several distance from the sensor

  • If there is blur at different depth, it's probably due to a shake of the camera (or the tripod, or both) when you press the button. It is usually due to the pressure/release itself, and also to the opening of the mirror before the shutter opens. To reduce that:
    • use a remote control instead of using the buttons on the camera
    • and also set the camera to use 2-steps shooting (the first step opens the mirror, the 2nd opens the shutter to take the photo). The first step usually shakes much more the camera than the 2nd. So by using the 2-step feature, the first one will be done in advance and then the camera returns to stability, and the 2nd one takes the picture. But don't wait too long between the 2 as dust (from area between the back of your lens and the camera) could enter the sensor more easily while the mirror is up
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.