Road Train !!!!!!!!!!

by Russell McMahon

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have found film reels some with tails of film others not. Is there a way of telling if they have been exposed/used in a camera? Film types are for 35mm and one Kodak Advantix.

share|improve this question

5 Answers 5

As for the Advantix (APS) film, check for a white circle on one side of the roll.

If only a half circle or an X appear in white, there'll likely be some pictures already taken: in the former case you'll be able to insert it into a camera supporting this feature and have it automatically start after previously exposed frames.

While this technique isn't foolproof (resetting this indicator was in fact a requirement to replace the film at any time with cameras not supporting the resuming of a roll) it should be a significant tipoff; with standard 135 film there is no such option and position of the film as it leaves the camera tells nothing about its contents, with no practical way of checking.

If you hold any expectations on their contents, have them developed at your local place (empty rolls are generally charged at a relatively low nominal price, since there'll obviously be nothing to print).

share|improve this answer
1  
I would recommed the same. Having them all developed and ending up with blank film is better than to be sorry with unusable double exposures. Anyway, nice reading about all this here, flamewars and whatnot. I bought my b/w film in 30 meter long rolls and wound the cassettes myself :) –  Esa Paulasto Mar 22 '13 at 20:46

The only sure way to tell if film has been exposed or not is to develop it. Any light used to examine undeveloped film will fog it.

It is probably safe to assume the rolls with no leaders extended out of the cartridge have been exposed. The rolls that still have film showing are another matter. Some cameras with motorized winders, such as my EOS film camera, would wind all of the film back into the cartridge after the roll had been shot. Some other cameras with motorized winders had an option in the settings that allowed you to leave the leader out. With manual film rewinders, the decision was up to the operator. Most folks would wind all the film back into the cartridge, but some would watch the exposure number indicator and stop when it got down to "0".

share|improve this answer
1  
My Pentax MZ-6 has motorized rewind, and leaving the leader out is an option in settings (useful if you'd like to switch between films). –  Imre Mar 22 '13 at 15:24
1  
If the leader's out check to see if it's crimped. Many/most film cameras reverse-roll the film and that will often leave a mark or crease on the leader where it fits into the take-up slot. –  BobT Mar 22 '13 at 15:34
1  
Many, but certainly not all, film cameras left a crimp in the leader. Neither my Rebel II nor Konica FS-1, for example, did. They both had motorized winders and large take up spools. The Konica's spool had teeth that caught the perforations on the edge of the film. Especially during the last years of film's heyday, many cameras had built-in winders that didn't leave a crease in the leader. –  Michael Clark Mar 22 '13 at 15:47
    
This is why I always used to make sure to wind my rolls in even if my camera didn't. So glad I don't have to deal with film any more. –  AJ Henderson Mar 22 '13 at 15:57

If you know what camera the film might have been exposed in, take a look at the takeup spool in the camera. Many cameras have a winding mechanism that involves some kind of slot in the spool into which you stick the film leader, and this bends the leader as film winds onto the spool. If the exposed leaders have a discernable bend or crease, that's a telltale sign that the film was in a camera at some point. If the leader is smooth you really can't say for sure -- IIRC cameras with integrated motor drives grabbed the film a different way and may not bend the film.

share|improve this answer

So I just found this thread and discovered a way to solve the problem actually. My Nikon L35af (I think...) leaves a little bit of the roll out when it rewinds. This is awesome when you want to shoot double exposures but a bummer if you forget whether or not you shot the roll yet. I compared the number of sprocket holes to a brand new roll of the same film - exactly the same. I looked at the end of the lead but there was no bend.

Finally - I noticed that the roll had very tiny scratches on it in the glare from my bedroom light, I compared the glare to a brand new roll and it was completely smooth. When in doubt try this method and see if it works for you. :)

share|improve this answer

Unused Kodak 35mm rolls have the tail, plus the ramp, right up to the full width of the film, exposed for three sprocket holes.

In my experience, auto rewind cameras set to "leave tail" will either rewind until all of the upper row of sprockets are within the canister, or with a longer length of the full width of the film than three sprocket holes. (IIRC, it was an option to choose between tail-out styles on some cameras, as the "more lightproof with film in slit vs. more lightproof with tail fully rewound" was a favorite flame war of the primordial pixel-peepers back in the day.)

You may have run into a roll of film where the photographer fiddled with it until there were exactly three sprockets exposed, or the film may have expanded or contracted on the spool over the years so there's two or four sprocket holes exposed, but it's a good guideline.

A GIS for "Fuji 35mm film roll" indicates that either 2 (Fuji Pan) or 4 (Velvia) sprocket holes are exposed for that company's product. I think it's a good bet that anything less than 5 or greater than 0 means it's unexposed

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.