Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I inherited Metz 35 CT2 flash from my grandfather and I don't have an idea how to set it up for use with my old manual Praktica camera. There is a "slider" which has lens hood numbers on it, DIN numbers above and distance in meters below. Then there is a chooser with options: TTL, M, yellow A, blue A, red A (these colors are also marked in the distance below the slider). How should I set the slider and chooser when I want to take photo with my all manual Praktica? Can someone roughly describe what does all the options mean?

share|improve this question
add comment

1 Answer

up vote 1 down vote accepted

Googled at some Pentax maillist archive:

User interface - very simple. Switch for mode selection - 3 auto (f2,f4,f8 apertures at 100 iso), manual, ttl. Above it is Exposure OK Check light. At top of back panel is f/stop & distance calculator, where you set iso and see instantly color-coded auto f/stops as well as maximum TTL/manual distance at any aperture.

So I guess the slider at the top sets power for manual mode, where aperture/ISO/distance table is a guide for setting the correct power. Colored auto modes might be build-in metering for different f-stops, and TTL should be TTL metering work with some Metz-compatible camera.

share|improve this answer
    
But how does manual and colored automatic modes differ? If I understand this, by setting manual mode and moving slider to position according to used iso, I can read maximum distance for each f/stop. What would change if I choose colored A mode (or why should I use it instead of manual mode)? –  calavera.info Sep 25 '10 at 21:51
    
My guess is that automatic mode uses some kind of built-in sensor to measure refrected light and adjusts the output power, while manual mode simply fires what you set on the slider. –  che Sep 26 '10 at 11:51
1  
I finally understand my mistake. The colors are displayed on the distance ruler and that confused me. Now I understand that it is not distance related at all. Instead, it is related to the slider above where it marks the aperture for the current iso. So for example the "yellow A" mode means that built in sensor gives you enough light for f8 if I use iso 100 (independently of the distance), but if iso 200 is used, then it is enough light for f11. So the slider is just a calculator, but for two diferent things. iso+aperture->distance in manual mode and iso+color mode->aperture in automatic mode. –  calavera.info Sep 28 '10 at 9:27
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.