The Sleeping Giant's Sea Lion

by Jakub

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

How do I deactivate the pop-up flash on the Nikon D7000 when using a flash unit that is mounted in the hot-shoe?

share|improve this question
1  
What flash unit are you using with the D7000? What shooting mode is your camera set to? –  Michael Clark Feb 20 '13 at 4:11

4 Answers 4

Check to see if custom setting e3 is set to commander mode. If so the camera thinks you want to use the pop up flash to control slave units. You need to change the mode to any of the other options: TTL, Manual, or Repeating. This is covered on page 223 of your owner's manual.

If that is not it, make sure the external flash in powered on, and that it is compatible with your camera. If the D7000 does not detect it and the camera is in a mode that activates flash automatically it will pop up the built in flash. Even if the camera doesn't detect the external flash it should still trigger it but you will have to choose a mode that doesn't automatically activate the built in flash. Try one of the PSAM modes. Since you're going to need to set the flash power manually in this case, you might find Manual mode will allow you the most control. You might also want to turn off Auto ISO sensitivity since the camera won't know the flash is going to fire.

If you are using a third party flash, be sure the trigger voltage of the flash is not higher than your camera can accept or you could permanently damage the electronics of your camera. See the answers and links to this question.

share|improve this answer
  1. If the built-in flash has popped up, push it back down. With a hotshoe flash attached, it generally should stay down.

  2. If it pops back up, then try P, A, S, or M modes. It should not pop up automatically in these modes.

  3. Still pops back up? You have the option of using the No Flash exposure mode

    enter image description here

  4. Failing that, as Michael Clark suggested, check the commander mode settings and turn the flash off there.

share|improve this answer

If your hotshoe flash is on, then the pop-up flash is automatically overridden, is it not?

share|improve this answer
1  
If the camera detects it, yes. Some third party flashes might not be detected. –  Michael Clark Feb 20 '13 at 4:06

Well the pop up can be deactivated even in automatic mode by pushing and holding down down the flash button on the left side of the lens and rotating the back command dial to non flash. But it works only for one at the time in that mode.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.