Forgotten in its old age

by Aditya

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

Do you know if leaving the sharpness setting to zero makes the image worse or better. I find that putting it to 7 makes it "sharp" but something seems artificial with it when I review the images. Does this make a difference if you're shooting RAW anyways?

I have a 24-105 L and usually shoot it at f/4.0 and around 24mm.

Is there a sharpness setting that works best for anyone?

share|improve this question
    
In some ways, this is similar to this question a out shooting with "flat" color settings. Low sharpening is a good idea if you are going to post-process and sharpen the JPEG later, but these days, if you are planning to do that, you should probably use RAW. –  mattdm Feb 8 '13 at 13:18
    
I read this question as "which number is 'source direct' where the algorithm for sharpening is bypassed"? It could be that they chose 0 as "nothing applied" or they chose 0 as "make it softer" while 3 is "none applied". However, the style "neutral" should be "source direct" and I believe that one is zeroes across the board. –  Michael Nielsen Feb 8 '13 at 13:22
    
For the 7D, set it to 3 if you want the least softness without visible sharpening artifacts. –  Itai Feb 8 '13 at 14:58

3 Answers 3

up vote 3 down vote accepted

If you read the 7D Review at The-Digital-Picture you see that Bryan Carnathan makes quite a few references to the need to increase the sharpness setting to "2" or "3" to match the output of many of Canon's other models (at the time the review was written). He attributes it to a stronger anti-alias filter. This makes sense as the 4.3µ pixel pitch on the 7D's sensor is tighter, and thus a higher frequency, than the other models he compares it to.

When shooting with my 7D I normally select the "Standard" picture style which includes a sharpness setting of "3". After importing the RAW file to Digital Photo Professional (DPP) this setting is used to initially display the photo. In general, I sharpen using the 'Unsharpen Mask' tool which replaces the in camera sharpening setting with the parameters I choose when the file is converted to JPEG or TIFF. Of course this is done non-destructively by adding a set of instructions to the file. The original setting is still attached to the file as well and can be restored by clicking the Return arrow to the right of the Picture Style heading on the tool palette (Even if you open a copy of the file made after you changed the settings later on a different computer).

Your final sharpen settings should be determined by the display size you intend for the image.

See also Recommended start point for sharpening RAW Images. There are a lot of variables that will ultimately determine your sharpening settings. The good news is that if you save your images as RAW files, you can always change it later if you want to.

share|improve this answer

@MikeW has answered the question about the effect on RAW, but to answer the other half of the question: changing the sharpness setting doesn't make the (JPEG) output better or worse: it makes it different. Increasing sharpness generally leads to better edge definition, but also to a greater visual appearance of noise and additional artifacts caused by the sharpening algorithm. What's "best" for a given photo depends both on the photo and on personal taste.

Unsurprisingly, there isn't a setting that is best for everyone. If so, you wouldn't get the option to change it :-)

share|improve this answer

The sharpness setting does not make a difference to the RAW image, but would be applied if you're shooting JPG.

I don't know what setting would be best, but if the range is 0-7 I would think an intermediate value (3 or 4) would be a good starting point.

If you are going to err, I'd err on the side of having less sharpening, because you can always sharpen in post processing.

share|improve this answer
    
Hello, The sharpness setting on the picture style is applied to the RAW output but it won't do so in a permanent way like jpeg. the additional sharpness is there but the sharpness data is seperate from the raw image data so you can still change it or reset the sharpness to default in DPP or lightroom. see the link for some info community.the-digital-picture.com/showthread.php?t=3100 photo.stackexchange.com/questions/13271/… –  ides Feb 8 '13 at 9:11
    
From what I read DPP would apply the sharpness setting, but Lightroom/Photoshop wouldn't. Anyway, some software will ignore any settings, other software will default to the setting you had in camera, but you can change them as you say. –  MikeW Feb 8 '13 at 10:03
2  
On the 7D in particular, 3 is medium-sharp. 4 is sharper but clearly adds artifacts. Zero is extremely soft not not usable without further processing. –  Itai Feb 8 '13 at 14:58

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.