Alley in Pisa, Italy

by Lars Kotthoff

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have a Canon PowerShot A3100IS digital camera. I was taking pictures but turned it off with the lens still open. I turned it back on, it loaded then made a beeping sound then a black screen came on with white letters stating:

Lens error, will shut down automatically, restart camera

and it turned off.

Any idea on how I would go about restarting the camera or fixing this issue?

share|improve this question

migrated from superuser.com Jan 27 '13 at 1:16

This question came from our site for computer enthusiasts and power users.

3 Answers 3

up vote 3 down vote accepted

It's possibly a mechanical issue with the retraction, but it could be a variable issue in the camera's software as well. You can try a few things to 'unjam' it, as such.

A non-randomly chosen example:

Fix #2: If the camera's batteries ran down completely while its lens was still open, the camera may show a lens error or not start properly when new batteries are installed. Remove the memory card and keep it removed, then install the new batteries. When you turn the camera on with the card removed it may come back to life, as this triggers a reset in some cameras. Error E30 (for older Canon's) means that you don't have a memory card installed, so turn it off, slip in the SD card and turn it on one last time

share|improve this answer
    
Thanks so much for the help. I tried this but it didn't work. It worked when the lens was pushed it lightly while turning it off. My wife did this and it worked just fine now. –  Christopher Chipps Jan 27 '13 at 6:10

My Sony point and shoot sometimes needs a push to retract it when turning it on. Normally it does it itself and then restarts. Other times I gently press the lens while starting the camera, then it retracts, goes out and retracts again and reboot.

share|improve this answer

Here are some troubleshooting steps that you can try that may (or may not) correct your problem. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:

And here's a video summary of the steps:

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.