Summer Start

by VonSchnauzer

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I recently purchased an old Nikkor 135 f/2.8 non-AI lens. Beautiful lens, but the closest focal distance is about five feet.

I noticed that it will 'focus' at about 4 inches as well. If I hold the lens a few inches from an object and look into the lens (no camera) an in-focus image is formed. I can use this for inspection of small parts, like a magnifier, and the image is upright, not inverted. I can magnify the subject quite a bit by increasing object–lens distance.

My 50mm f/1.8 AI lens is very different — it forms inverted images under those conditions.

Why are these different, and could I use this close focus mode in a camera somehow for macro work?

share|improve this question

2 Answers 2

When you have the lens mounted on the camera and you look through the viewfinder you are viewing an image projected onto the camera's focussing screen. This is like taking a picture of a picture (with your eye being the second camera).

When taking a picture of a picture in this way the focusing ability of the second camera cannot affect the image itself i.e. if you photograph a non-macro image with a macro lens you can't make the image be focussed any closer.

Now when you hold the lens up to your eye you are producing a compound lens system with the camera being the first lens, and the lens in your eye being the second. When chaining lenses in this way both lenses affect the focusing properties of the whole system, thus you are able to focus much closer than when the lens is on the camera.

However, there is no way to exploit this particular effect to take macro photos without removing the lens from your eye and installing it in front of the camera sensor. This is not recommended for safety reasons, however you can buy add on lenses to enable you to take close up photos see What is the use of these Hoya +1 and +2 filters?. There are other ways to get closer focusing from your lens, see: How can I take a macro shot without a macro lens?

Whether you get an upside down image when looking through a lens depends on subject distance and where you eye is in relation to the lens. With a 50mm lens I can get a right way up image (that my eye is unable to quite bring into focus) when I hold the lens right up to my eye, and a well focussed upside down image when I hold the lens at arms length. With a longer focal length (and different construction, the 135 is a telephoto) these distances change.

share|improve this answer
1  
+1 for "This is not recommended for safety reasons" :P –  Chinmay Kanchi Jan 25 '13 at 13:47

Yes, holding the lens away from the camera like that is called freelensing. For more accurate work you can use extension tubes to hold the lens at a fixed position.

You can also reverse your 50mm for macro work (mount it back to front).

Not sure why one image appears inverted and the other not, but suspect it's due to the relative distance you're holding the lenses away compared to the focal length.

share|improve this answer
    
The non-inverted image is virtual; it's the result of either the object or the viewer being closer to the optical center of the lens than the focal point. A virtual image can't be recorded directly; you need to use a system (your eye or a camera with a lens) capable of projecting a real image onto the recording medium. With freelensing, you're always working with a real (inverted) image. –  user2719 Jan 25 '13 at 13:38

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.