Open

by damned truths

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have a customer who has a very, very dark room that she wants to take portraits in. I'm photographing a 2 month old baby. What type of lighting should I use?

share|improve this question
1  
Flash? Bounce it off walls/ceilings? –  BBking Jan 25 '13 at 1:18
2  
Flash. Add additional lighting. High ISO camera. Any/all of the above. –  jrista Jan 25 '13 at 1:18
2  
It's hard to know where to start with this, because it's so basic and so general. What kind of look are you hoping to achieve? Have you ever taken photographs in a similar situation? I think I'd start by looking through the lighting basics tag here — that might give you some ideas. –  mattdm Jan 25 '13 at 1:27
1  
Use the type of lighting that provides more light. That is, any additional lighting. Open a curtain, use flash, turn on lights(but don't mix color temps). Also consider that you are the photographer. If the images would look better in a differently lit room, then by all means speak up! –  dpollitt Jan 25 '13 at 2:44
2  
Well: a room with no windows describes most photo studios. And you can certainly do it with two lights. Again, what kind of look are you going for? –  mattdm Jan 25 '13 at 4:10

2 Answers 2

Well...

...first, you didn't say what kind of mood you'd like. Also, you left the question quite general. Hence I'll try to give you some general tips:

  • flash (like the others said) bounced on the ceiling give a soft look, but usually this scares the babies which are so young, and I presume that the stark contrast of the unexpected powerful light compared with the darkness of the room could scary a lot the baby, hence, because of the possibility of a very unpleasant reaction from child, you will not have the occasion to shot many frames.

  • there is a logic in light. Why the client wants to shot the baby in there? In what pose? Is better to tell us these things. Perhaps she wants to photograph him asleep? Perhaps the room is important? Perhaps she doesn't want a simple head-and-shoulders portrait but an environmental portrait? Hence I think that's better to have a logic in light. While a ceiling-bounced flash might simulate the normal light which is in a room, perhaps is better to put one or more lamps with lampshades in order to give a different, more intimate mood and make the baby more cooperative. Also, I think that you can achieve a very good mood with this solution.

  • you can also combine the two solutions above but you must be careful at how the light will fall and also at different temperatures of light (a gel might help). Also in this case the flash, which will act like a fill flash, won't be so scary for the baby.

  • again, taking in consideration that you need to show also the room, you must have in mind the high ISOs (this applies especially if you use the lamps only), the fast aperture lens (eg. primes) (which gives you low DoF to separate your subject, keep the ISO and shutter at desired values) and in the case of using flash consider dragging the shutter in order to show also what's around.

Good luck and good light!

share|improve this answer

We take photos with light. You can't take photos in a very dark room.

The usual approach for babies is to bounce the flashes off the ceiling (if its white). This gives a nice soft light.

These photos of my grand-daughter were taken with three small strobes/speedlights bounced off the ceiling.

http://www.flickr.com/photos/the_old_curmudgeon/8398939989/in/photostream

share|improve this answer
1  
Well, you could technically take photos in a room nearly devoid of light with a high enough ISO setting. With ISO 12800, 25600, or even 51200 becoming more available and more useful, you can now take pictures in extremely dark settings. –  jrista Jan 25 '13 at 6:41
    
Fooey on your technicality. Consumer priced cameras have mediocre high ISO abilities. If you get an image, its got huge digital grain. Just turn on some lights. –  Pat Farrell Jan 25 '13 at 15:06

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.