Serene Life

by garik

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have a Nikon 60mm f/2.8 Micro lens (DX sensor) and I haven't been able to exactly determine what magnification I can get with Kenko 12mm, 20mm, 36mm extension tubes. Suppose I would use all of them together.

Also how many stops of light would I lose using them?

Depending on the answer, is it worth it to obtain the tubes or the macro effect wouldn't be so different and I would lost a lot of light instead? I would buy them only if I could create images with magnification similar to this one

this

share|improve this question
1  
possible duplicate of How can I calculate what the effect of an extension tube will be? –  mattdm Dec 22 '12 at 14:29
    
@mattdm I still don't know if it helps on macro lenses (which can focus at close distance without help) or I have to use some zoom (70-300) with the tubes to get good magnification. –  Tomas Dec 22 '12 at 14:44
    
A "macro lens" is just a (well-corrected) ordinary lens with a built-in, adjustable extension tube. Adding additional tubes will get you closer than 1:1 (by how much depends on the actual focal length of the lens at its 1:1 focusing distance), as with any other lens. And, as with any other lens, you may hit a point where the required subject distance from the optical centre of the lens for a given magnification lies inside of the lens, at which point the lens would need to be reversed. –  user2719 Dec 22 '12 at 19:18

1 Answer 1

up vote 3 down vote accepted

The previous post link talks about magnification.

As far as light loss, I would first suggest you just use the meter in your camera. It should show the relative setting no matter if you have neutral density filters or extension tubes attached.

If you really want to calculate this stuff manually, adding extension tubes simply alters the focal length of a lens. And the aperture of a lens is a ratio of its focal length.

Using the formula N = f/D (F-stop = focal length divided by diameter of lens opening), your 60mm f/2.8 lens has an pupil diamter of 21.43mm.

Now, you add 12mm of extension and your focal length becomes 72mm, but the physical aperture and diameter sizes of the lens did not change.

This means that your new f-stop value, with 12mm extension, becomes f/3.5 which is 72mm / 21.43 opening size, or, 2/3 of a stop less light.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.