Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I am looking to purchase a light tent and lights to do some product photography. I need to purchase lights but I am not sure what to look for in lights. A few requirements:

  • Must be easily transportable. IE: I can carry them in a bag and hope on a city bus with them.
  • I will only be doing this, at most, part time to start, I am not looking to spend a lot of money, however, I do not want something that will fall apart after a couple uses.
share|improve this question
add comment

4 Answers

up vote 5 down vote accepted

There are a couple of things to keep in mind here.

First, a 30" light tent is a pretty fair-sized piece of kit when set up, and there are things that are going to have to be lit predominantly from the top (top-plus-modifying-direction, at least). That means that a 12", 18" or 24" desk lamp, no matter how useful it may be otherwise, can never be more than part of the kit. That means you're going to need some sort of stand that will be at least 30" high plus some working room. The shorter the stand, the more likely it will be that you'll need some sort of boom arm to get the light where it needs to go. And if you want to do that on a tabletop, the footprint of the stand will move the light quite a ways from the light tent.

Second, portability doesn't have to mean "fits in an evening bag" or even "fits in a large laptop-type bag", but it is going to mean (probably) foregoing the cheapest options out there. The typical spun-aluminum reflectors can make the resulting package rather bulky, even if you remove the reflectors from the sockets on every tear-down and stack them. The tiny reflectors you'll sometimes see on work/utility lights (in the 4-6" range) may be good at reflecting extra light onto the subject, but they don't do much to constrain spill (the bulb usually extends beyond the reflector unless you use something in the 25-40W incandescent range).

Finally, there's an awful lot to be said for ease of set-up and tear-down, and since portability is one of your stated concerns, I have to assume that getting set up quickly once you get where you're going rather than fiddling with duct tape and coat-hanger wire to finagle things into place is going to be important as well. (It also presents a whole lot more professional appearance to clients and coworkers.)

If 'twere me, I'd be tempted to go with something like the Westcott uLite kits. (The "Erin Manning Home Studio Lighting Kit" is the same thing, but with compact fluorescent bulbs rather than 500-watt ECT-type photofloods. You can always use CFLs instead of the supplied ECTs, and there are socket splitters you can get later on to use 4 CFL bulbs for greater power.) Note that I said "something like": I know that the Westcott stands, though short, will hold out for years and will always be useful for holding reflectors, etc., when you "graduate", and that the softboxes will take more than a couple of set-ups and tear-downs without shredding, but there are some very similar kits out there for a lot less money. You can use the fixtures with or without the softboxes, and you can use the softboxes with or without the front diffuser material, so there's a lot of versatility there for different lighting styles. You can also use black fabric with a bit of velcro to mask off part of the box. And the softboxes will fold down very small, leaving the length of the folded stands and the size of the (protected) light bulbs determining the package size. You can fit the whole kit into a relatively slim and not-too-very-long tube, which will sling neatly over a shoulder.

share|improve this answer
add comment

You can use nearly any light, but continuous lighting has a lot fewer lumens of light per pound of weight than strobes. I use small, manual strobes. aka speedlights. Soemthing like a LumoPro LP160 works well, and can be triggered optically, so you can have multiple strobes.

I carry three LP160s, my 50D body, a 17-55 zoom, a 50mm prime, and a 55-300 zoom in my messenger bag and have tons of room for other stuff like battery chargers.

share|improve this answer
add comment

There are a range of possibilities. Since the tent itself will tend to diffuse the light you probably don't need any sort of external diffuser on the lights themselves. Since the products you'll be shooting are most likely inert (not moving) then you don't need a strobe to freeze motion, although a strobe isn't a bad solution.

My first suggestion would be to get a couple of clip-on work lights (the ones with the 10" aluminum reflector and a switch on the socket) from your local hardware store and put 100 watt floodlight bulbs in them. total cost would be ~$20. Put one on either side of the tent. Make sure you keep the lights a couple of feet from the tent so you don't overheat the material. The advantage of the clip-ons is that you can use found objects (chairs, bookshelves, etc.) instead of needing to carry a stand with you..

Suggestion 2 would be to pick up a couple of cheap screw-in strobes instead of the floodlights (like these: http://www.bhphotovideo.com/c/product/121845-REG/Smith_Victor_690001_45_W_S_Screw_in_Strobe.html ). These come with a sync cord or can trigger when another flash goes off. Total cost ~$100. You wouldn't need the aluminum reflectors with these...

share|improve this answer
add comment

I use small flexible desk lamps. They're small and easy to transport, cheap, and provide bright continuous light.

I believe you can now buy LED lamps, which would not get so hot, and would produce a more neutral light. Not sure if they would be as bright, but if you're shooting on a tripod, as I assume you would be, then might be a good choice.

Depending on what bulbs you use, you'll just need to set your white balance accordingly.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.