Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I'm using an IR LED for controlling my Canon 550D/T2i for a time lapse.

If I shoot each 6 seconds everything is fine, but I want to shoot each 1 second. Then I have problems, it shoots at random times.

I have disabled all automatic settings and I have set the lowest resolution I have. Things are little better but not working, it shoots 10-11 photos each second but then for 5-6 seconds nothing.

Is the rate of 1 shoot per second too high?

share|improve this question
    
I would reset the camera to factory default settings, and also test this out after putting your camera in manual focus. Potentially it could be searching for focus during those few seconds, and this would take that out of the equation. If you are trying to do quick shots like this, an intervalometer might work better. You could just set it to take an image each second for 30 seconds, etc. –  dpollitt Nov 14 '12 at 16:04
1  
there is manual focus! –  nkint Nov 14 '12 at 16:22
    
and i want to shoot a clock following the second handle so i need each second! –  nkint Nov 14 '12 at 16:24
    
For this purpose, I think you'll far better results by installing the Magic Lantern firmware and using its intervalometer function. –  mattdm Nov 14 '12 at 19:36
    
Suggestion non-intervalometer related: If I wanted a picture of each second on a clock, I would unplug the clock and manually advance the needle. –  Danny T. Nov 15 '12 at 16:20
add comment

1 Answer

It should not be but you would have trouble if long shutter noise-reduction kicks in. On some cameras it can be disabled entirely.

From your description, it sounds like it could be a slow card. You lowered the resolution which should help but I have no idea how slow your card is. Try a faster card.

share|improve this answer
1  
faster card?? are there sd card with different velocity?? i didn't know it. –  nkint Nov 14 '12 at 16:24
    
SD/SDHC/SDXC cards come in different classes, although some manufactuers label them with X-speed (1X = 150 KB/s) or simply MB/s. The higher the class, the better. Faster cards allow to empty the card buffer faster and avoid the camera stopping for a while as it empties like like you described. The same will happen when you shoot using the continuous drive. Keep in mind that you do not necessarily needs the faster card, only one which is fast enough. Still, the last 95MB/s card I bought cost less than $50 USD, so no need to skimp either. –  Itai Nov 14 '12 at 16:37
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.