Forgotten in its old age

by Aditya

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have a fairly new Nikon D7000 (I've taken about 2000 pictures).

Something happened during my last trip, where thew viewfinder never gets sharp anymore. It always looks out of focus, regardless if i am in manual or automatic mode.

Pictures still come out sharp, and when I switch to the LCD screen I can see the focus, but not in the viewfinder.

Is there some sort of tuning that needs to be done?

share|improve this question
    
possible duplicate of Why is my Nikon viewfinder suddenly fuzzy? –  mattdm Nov 7 '12 at 15:37
    
@mattdm - Since the other one is not so clear and has no accepted answer... probably because of such a strange description, if it is indeed the same problem... I would close the other one or ask the asker some clarifying questions. –  Itai Nov 7 '12 at 17:01
3  
Yeah, this one is certainly more clear. No pun intended. –  mattdm Nov 7 '12 at 17:02

1 Answer 1

up vote 13 down vote accepted

You certainly knocked the diopter adjustement out of place. It is there to compensate for people who need eye-glasses.

enter image description here

With your eye looking through the viewfinder, adjust the knob on the upper right side until you see what is in focus clearly sharp.

share|improve this answer
    
Most (if not all?) also have a little bump/marker for ±0, if you happen to have good eyesight (which seems likely if you're not aware of diopter adjustment knobs). –  drfrogsplat Nov 7 '12 at 3:28
1  
ok, now i feel like a complete moron for not figuring this out. also i never knew about the word "diopter", i bet i'll start hearing it everywhere now :) thanks! –  Sonic Soul Nov 7 '12 at 3:30
    
Not all unfortunately. I do find it odd that it is not marked on a good number of DSLRs. Looks like it is on the D7000 (see image) but on the D4 it is not and neither on Pentax K-5 variants, although it is impossible to accidentally change it on the latter since you have to remove the eye-piece to access it. –  Itai Nov 7 '12 at 3:32
    
How can I reset it to factory settings if there are no indicators for the no of turns made ? –  GoodSp33d Nov 7 '12 at 18:05
1  
No. Factory settings do not affect physical dials like this one since it moves a lens inside the viewfinder. –  Itai Nov 7 '12 at 18:41

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.