The Sleeping Giant's Sea Lion

by Jakub

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

How do you calculate the flash power fraction, assuming you want to keep constant the other variables of ISO, aperture, and distance from subject to flash?

The Guide Number formula for a flash (strobe) is GN = distance * f-stop

Let's say the Guide Number is 174 at ISO 200. You want to shoot at f/8. This gives a distance of d = 174/8 = 21.75 feet

Now, let's say you're shooting in a room that doesn't have that much room to play with.

But you do know you can move the flash 10 feet away.

What fraction of power do you use?

Is it linear, e.g. 21.75/10=2.175, so use 1/2? Or something else?

The numbers in this example are for the Nikon SB-800 and a Nikon D90 camera, but the principle is likely the same.

share|improve this question
    
GN doesn't double as ISO doubles, it increases by a factor of √2 (inverse-square law again), so your GN would be 272 in this situation. –  ex-ms Aug 20 '10 at 23:17
    
Thanks Matt. Edit: Corrected Guide Number to what's published for the SB-800 at ISO 200, changed numbers in the example to make it easier to follow. –  jfklein13 Aug 21 '10 at 3:28

4 Answers 4

up vote 4 down vote accepted

Light falls off according to the inverse-square law. Basically it boils down to this equation:

I ~ 1/r2

Where I is the intensity and r is the radius (which is subject distance for us) and the ~ means 'approximately equal'. Anyways, a couple of good articles on the subject can be found at Cambridge in Colour and at Portrait Lighting.

share|improve this answer
    
+1, great links. –  jfklein13 Aug 21 '10 at 3:35

Its not linear, its a square, so if you double the distance, you need 4 times the light. So in your example you would need 1/4 the power, or adjust the aperture and or ISO.

share|improve this answer
    
Aha! That might explain some surprises in recent shooting sessions. So in closed form the fraction of power is (d/(gn/f))^2? –  jfklein13 Aug 20 '10 at 22:21
    
Yes, that's correct. Square of the ratio of the real distance and guide distance. (Though see my note about GN attached to the question.) –  ex-ms Aug 20 '10 at 23:15
    
Going from 20' to 10' flash distance would increase exposure by x4 (2 stops). 2 stops less than full flash power would be 1/4th (2x2=4). 1/16th is 4 stops less (2x2x2x2=16), or what would be needed in the above example if the flash was moved to 5' from the subject. –  Henry Peach Aug 23 '10 at 13:36
1  
@Henry - Just to clarify the apparent error here; the example changed from an initial 40ish feet to the current 20ish after this answer was written. It was correct at the time. (And I'll correct it now, since BillN might not have noticed the change) –  ex-ms Aug 25 '10 at 18:18

Personally, I just guess, take a shot and look at my histogram and tweak as needed. I just find it quicker and less complicated on my poor brain. It also affords me more brain power to keep talking to my subject.

share|improve this answer
    
Absolutely! I don't plan to go computing this all the time. My original reason for asking was for shopping for lights. I wanted to see some tables that show what power setting on a given light would be needed for a given aperture and subject distance. This discussion helped tremendously. –  jfklein13 Aug 25 '10 at 21:25

If you have an iPhone or iPod Touch you could do worse than pick up a copy of PhotoCalc - a great piece of software that, among other things (DoF calculator, sunrise/sunset times), will do exactly this for you!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.