Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

This question discusses how to measure the dynamic range of a camera. How can I measure the saturation luminance? A complete example would be most appreciated.

share|improve this question
add comment

1 Answer

up vote 5 down vote accepted

The saturation luminance is the brightness level above which pixels stop recording unique values and instead record the same maximum value (which is often interpreted as pure white).

You can find the saturation luminance by taking images of increasing brightness until the images start to come out pure white. You can increase brightness either by changing the lighting, or the shutter speed / aperture value.

The saturation luminance is only meaningful however when you also know the luminance at which noise dominates the signal. The ratio of these two figures is your dynamic range.

From your other questions it seems like you're trying to measure the dynamic range of a phone camera. This is going to be very difficult unless you have software to control the camera parameters (namely shutter speed, I assume the aperture is fixed), or have a well calibrated lightsource.

share|improve this answer
    
I am trying to measure the dynamic range of a phone camera. Now i have assumed the aperture fixed and known the shutter speed,but i cannot calculate the dynamic range(namely i cannot calculate the maximum luminance) –  petalse Sep 3 '12 at 2:40
    
@pealse You need to calculate both the maximum and minimum luminance, which means you have to have some way of controlling the light entering the camera. Why do you need to know the dynamic range? If it is for some scientific purpose, if so you might be able to contact the manufacturer of the sensor for a datasheet. Otherwise you will need either shutter control or a calibrated lightsource. –  Matt Grum Sep 5 '12 at 10:05
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.