Open

by damned truths

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have a dSLR body that can control off camera flashes using the light from its own popup flash (60D). When shooting with off-camera flash, I find that for it to work the flash must be oriented so that the front of the flash "sees" the popup flash.

Does this mean that in order to use an umbrella or softbox, I would need to get a radio controlled trigger system?

share|improve this question

2 Answers 2

up vote 6 down vote accepted

Not necessarily.

The sensor on the flash must be able to "see" the triggering flash, but it does not have to be direct light. The 430EX and 580EX both are sensitive enough that bounced flash works equally as well. You simply need to orient the flash sensor so that it can see 'out' from the umbrella, even if that means a convenient wall or other reflector. You will find that you can even put a flash in an adjoining room, as long as there is some ability for your triggering flash to be 'seen' by the slave unit.

For example, this image shows two 430EX flashes, used outdoors. One, being held by the biologic flash stand, has the sensor covered by the biologic flash stand attachment point (hand). The other 430EX is behind the umbrella itself, but can 'see' the triggering flash thru the umbrella and via the reflector. Note that the 430EX sensors are pointing to the side. Also, this is triggered via an ST-E2.

enter image description here

share|improve this answer
2  
I believe the vogue term is "voice activated light stand", or VAL. –  user2719 Aug 15 '12 at 23:50
    
Thanks. I'll have to try it and see how it works. Any modifier (box,umbrella,shoot-through) that works better, i.e. allows easier control of the direction of the front of the flash? –  Anders Forsgren Aug 16 '12 at 8:52
    
I use a convertible Impact umbrella...its cheap and thin. Also, use an umbrella bracket, which allows the flash to be moved and adjusted a bit independent from the umbrella –  cmason Aug 16 '12 at 17:46

There is no requirement of direct line of sight between the flash(es) and the 60D wireless transmitter, but my experience firing flashes mounted on stands with umbrellas, softboxes or other modifiers is a hit or miss. Many times I had to waste time twisting the flashes into awkward positions just to get them to fire.

I ended up buying ultra-cheap CowboyStudio radio triggers and found them to be much more reliable. I always use the radio triggers when I work with manual flash, which is most of the time.

The few occasions I want to use TTL flash I use the 60D's wireless trigger and live with its limitations. As far as I know there are no cheap and reliable radio triggers that can transmit TTL data, but would love to be proved wrong!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.