Open

by damned truths

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

Is there an off/disable control anywhere? I realize that the INFO button toggles it off, but it comes right back on as soon as you tap the shutter, and that it a problem in low light situations where the LCD keeps blasting me in the eye.

share|improve this question

6 Answers 6

up vote 5 down vote accepted

So, the answer to this is "no", there isn't. You can disable it in some circumstances, but as you've seen, it will keep coming back on. The user interface of many entry-level DSLRs is designed around the rear LCD screen, and these cameras also generally don't offer a huge amount of customization. This is also the case on the D3100, which is roughly a successor to the D40, and the slightly-higher D5100 model.

The D7000, though, has a small LCD status display on the top of the camera as well (as do mid-range cameras from other companies). Since that provides alternate access to key information, the software isn't as over-excited about turning on the rear LCD as it is on the lower models.

share|improve this answer
1  
Turning Auto Shooting Info off (page 83 of the D40 manual) doesn't do it? –  Dan Wolfgang Feb 17 '12 at 17:16
1  
@Dan: no. That keeps it come from coming on in some circumstances but it will still come on when you make adjustments to settings. –  mattdm Feb 17 '12 at 17:33

You can try covering the panel with Rubylith, astronomers use this a lot to dim bright display. It has a dark red tint to it so you'll still be able to see the display but it should seriously cut down on the eye glare and even retain some of your night vision. (Just some, it isn't perfect.) If the display has a dimmer on it, if you combine that with Rubylith you should have undamaged night vision.

I use this on my Palm Pilot which ran some excellent astronomy software and preserved my night vision perfectly.

share|improve this answer

This is the solution for me: Buy and install the Delkin Pop up Hood that's made specifically for this model camera. It's actually a sun shade with a black cover for the LCD when not in use, but in about 1/2 second, you can pop up the cover to view the LCD if you desire. They cost about $12.

share|improve this answer

This may not get you all the way, but you can turn off image review.

According to http://www.kenrockwell.com/nikon/d40/users-guide/menus-custom.htm, you can do this by going into the menus:

  1. Custom (pencil icon)
  2. 07 Image Review

Set this to Off.

To see this, you may need to set Full Menus in the Setup Menu (wrench icon) and be shooting in P, S, A, or M mode.

share|improve this answer
    
Well that seems to keep the display in info mode, but alas, the display is still on. If only the LCD brightness setting had an OFF choice. I already have it turned all the way down... –  Chris Noe Aug 18 '10 at 0:10

I'm afraid I've got to agree with the others - it's not possible completely. I'm also a D40 shooter and it's annoying late in the evening or at night. While all I need is visible in the viewfinder, the display flashes to the eye from below...

I tried to velcro a black rectangle over it. (First a piece of an old 8" floppy and then a thick paper covered by a black tape.) But it was pain although the velcro was undone pretty quickly - and got lost too :-) I thought I shouldn't need to get to the menu so often but at last I did need it.

You can also upgrade your camera to some else with swivel display and rotate it to make it face the body. Also, other cameras have bigger or brighter viewfinder better for shooting in the dark. And maybe a camera with the backlit upper display to be able to leave the LED flashlight at home :-)

--- Ferda

share|improve this answer
    
Did the d40 come with a (rigid) screen protector? If so, you could spray that black. –  Instantkamera Apr 12 '12 at 11:38
    
No, it didn't - at least, I believe I didn't lose it :-) But I've happened to find one or two immediately. It is an interesting idea; either spraying it or covering it by some tape like Rubylith mentioned below. I'd like to have it removable - I should like to test how easy it goes off in comparison with velcros. –  Ferdinand Prantl Apr 12 '12 at 12:50

Yes, there is:
Go to Menu>Configuration (Wrench icon), fourth choice (Auto shooting info) and set everything to off.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.