Time passes by

by clabacchio

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

After reading the answer by Bill to this question became curious about IS modes. So, What is basically IS mode? Does all lens comes with various IS modes?

And what are various situations to use these modes?

share|improve this question

3 Answers 3

up vote 7 down vote accepted

IS modes are used to tell the camera what kind of movement to correct for. All implementations I'm aware of have at least two modes: "normal" to correct for motion in all axes and "panning" to allow motion in one axis while correcting for motion in the other.

The exact details of each available mode depend on the manufacturer, for example Canon lenses can have up to three modes (normal, panning, and panning but only active when taking the shot), while Nikon lenses only have two modes (on when focusing, on when taking the shot) but panning detection is automatic rather than by changing modes and they also offer a choice of two motion correction modes 'Normal' and 'Active', with Active being intended for use while in a moving vehicle and therefore offering stronger correction.

Newer lenses will generally have more IS modes available than older lenses, and stabilized Telephoto (and Super-Telephoto lenses) will usually have more modes than stabilized primes or zooms.

The IS in newer lenses will also tend to be more effective than in older lenses allowing for even lower shutter speeds.

share|improve this answer
    
some lenses only have on and off (kit lenses mainly) –  damned truths Jul 28 '12 at 5:21

I'm only familiar with Canon's and one Sigma IS lens.

All newish Canon lenses have two IS modes, normal (Mode 1) and panning (Mode 2). Basically you use normal for everything except when you're panning to capture "motion" in the picture. The same is true for the Sigma lens I've tried.

Older lenses might only have one IS mode, but I don't know of any.

share|improve this answer

Sorry I wasn't too clear with my answer, you asked about a photo from a Canon contest, so I assumed that it was done with a Canon glass, but please take a look at Canon's explanation on the matter.

Basically, the tl;dr

  1. Mode 1: You can use IS in both vertical and horizontal
  2. Mode 2: Used for panning at right angles to the motion V or H.
  3. Mode 3: Enhances Optical Mode 2 by functioning only when the shutter release is fully pressed. Allows for better panning and sport photography. (Mode only on L lenses so far)
share|improve this answer
    
Canon's explanation is quite perfect. I suggest you add one line to your answer to describe Mode 3 too, to keep a complete overview here. –  Itai Jul 27 '12 at 20:34

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.