The Sleeping Giant's Sea Lion

by Jakub

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I am new to using the D3100, and was out with my family at the weekend taking pictures. When I got home I noticed that a few images had not been saved correctly. Does anyone know any reason why this could be so i can avoid it in the future please?

I was storing the images in the .nef format (RAW, I do believe) and am using a 32GB Transcend SD Card - class 10.

share|improve this question
2  
This is probably a good starting point: photo.stackexchange.com/a/6048/5551 –  forsvarir Jul 16 '12 at 8:52
    
Just for confirmation, yes, .nef is Nikons RAW format. –  Michael K Jul 16 '12 at 9:45
1  
Hi there. You mention that the images had "not saved correctly", how did you realise this? Were they just not on the card or did they appear to be there and you could not open them? Have you tried another card? Do bare in mind that you will need an application that is able to read .NEF files such as Adobe Camera Raw/Nikon Capture etc. If you are unable to view NEF's in Windows you can download the NEF codec that will allow you to view .NEF's in Windows Picture Viewer. [link]nikonimglib.com/nefcodec –  Chanstarco Jul 16 '12 at 13:45

3 Answers 3

up vote 1 down vote accepted

Every time you insert your card into the camera, you should format it in the camera. Many times, errors occur when you remove the card from the camera and insert it onto a PC, which could write junk onto the card that the camera cannot understand. Each time you pull the card from the camera and replace it, you compound the chance that corruption will occur. Nikon provides a menu command ( and dedicated buttons on some bodies ) that will format the card in the camera, which will minimize the number of memory card related issues you'll encounter. I know this doesn't help your current problem, but could minimize future problems. I originally found this solution on Ken Rockwell's site in his D90 user's guide, but the tip is also found here Rockwell Pro Tip about Formatting Memory Cards

I have witnessed this corruption several time personally, and have not seen it since I've started with the format card on every insertion policy.

I also wouldn't assume the card is bad until I tried the formatting. A class 10, 32gb card cannot be that old, and is not cheap. I still use 4gb trancend cards that are probably 3 years old and see heavy use without issue.

share|improve this answer

Are they OK in camera or not? If OK in camera but not elsewhere look to a transfer problem, otherwise look to a card or camera problem, start by checking all connectors are clean. Had you formatted the card in camera before first use?

share|improve this answer
    
No, on the preview screen they were just little red squares with a red cross inside. So could not view them. The camera is working fine, out of around 200 images only 10 did not save/were corrupted. I formatted the SD card before use. I did use it in my DRIFT HD action camera, and that did not save a few videos previously. So i am starting to think its an issue with the SD Card! My smaller 16GB SD has not had these issues. –  thatuxguy Jul 16 '12 at 10:22

I believe your SD card is corrupt. Try another card? I wouldn't use that card if I were you.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.