Apples

Apples

by Garik

submit your photo


Picture of the Week Themes
Suggest and vote on themes

Please participate in Meta
and help us grow.

Tell me more ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

with 18-55 mm kit lens , canon 1100d model the in Tv or M mode the shutter speed is more than "1/200" always produces dark images, the max "f"-stop in this lens can be go to 3.5 maximum light can reach.

SMALL F-STOP NUMBER = LOTS OF LIGHT

i know the fact a fast shutter speed lets in less light, but a small f-stop lets in more in my case with 18-55 mm kit lens, the camera always produces the dark images, i'm not able to use the full flexiblity of my camera even the lighting condition is good,

do i have to use smaller f "1.8" and then try or something wrong with the setting

18-55 mm lens,canon 1100d model the in Tv/M mode the shutter speed is more than "1/200" always give dark image?

share|improve this question

2 Answers

up vote 5 down vote accepted

Look at your exposure meter. Your gear is only capable of so much and in the Av/Tv/P modes it will attempt to use your settings (such as your specified shutter speed), and adjust the other settings to get the right exposure. If you adjust a setting too far then it won't be able to keep up. You should see your meter and/or shutter/aperture settings (whichever one isn't being set manually) blinking to indicate that it won't expose correctly.

share|improve this answer

Additionally, if you're in Tv mode, when you half-press the button, if you see the Aperture number blinking, it means you are underexposing your picture. You can force the camera to take the picture, but the blinking was there to warn you.

In Manual mode, as was said by @tenmiles, the Exposure Meter will tell you whether you are properly exposed.

Additionally, check the ISO setting. If you want to keep the shutter speed at 1/200s, and the aperture is blinking, you'll have to bump the ISO up. You may want to try out ISO Auto instead of a fixed ISO setting.

Another thing you can try, take a picture with your Tv mode, take the same picture in Full Auto (green square mode), and compare the EXIF data for both pictures...

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.