Orquid "Phoenix"

Orquid "Phoenix"

by ceinmart

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.
1  
Are you sure this was shot and not photoshopped or drawen on tablet? –  zacharmarz Jun 5 '12 at 18:58
1  
This photo comes from an article titled How To: Make a Photographic Diptych. It's pretty conclusively a photograph. (The article does not, however, discuss the shooting technique.) –  mattdm Jun 5 '12 at 19:42
1  
@mattdm: Well, it does seem to say that the flowers were backlit by a stobe. –  che Jun 5 '12 at 20:08
    
@mattdm - It does say backlit and, based on the images, it looks like the only light is from behind. That's all that's needed here to reproduce, I think. I may try this weekend. –  John Cavan Jun 6 '12 at 2:11
    
Okay, then, I take it back. The original article is the answer. :) –  mattdm Jun 6 '12 at 2:19
show 2 more comments

2 Answers

up vote 6 down vote accepted

Just some thoughts: assuming the average person does not own a translucent table, I'd cut just the flowers' heads from the rest of the plant (maybe these are just petals, which I deem highly probable) then arrange them on a piece of thin white styrofoam (or perspex covered with thin white paper) suspended on two boxes or book or whatever. A diffusing layer (paper, etc.) is necessary to avoid massive flare and to have the background come out quite uniform. Also simple white fabric (i.e. blankets) should do the trick very well, if properly arranged.

One light (strobe or continuous) needs to be pointing upwards under the plane where the subject rests. This, even if very powerful, could be not enough to light effectively every part of the subject, depending on its thickness, so another light source (MUCH weaker than the first) could be directed (in symmetrical opposition to the fist one, maybe through some diffuser, say an umbrella) from an higher point straight down on the petals/flowers.

The second lighting scheme could yield undesirably flat results, to be improved in post production assigning appropriate values to different parts of the flowers. Some curves treatment could be needed even if using just one bottom light, part to reduce some loss of contrast due to stray light getting into the lens, part to make sure all the background clips to white while retaining detail in the petals. A proper lighting and arrangement of individual petals (to be done, I dare say, with the help of a light bulb or flashlight) is however extremely important for this shot, which can be fixed in pp only partially. Of course the two halves of the diptych can be shot separately.

Here is a rough sample of what I described, made with some rose petals and a piece of frosted glass from a lamp holder. The built-in camera flash is used at TTL -3.0 EV to light the petals up a bit while triggering a slaved speedlight with its diffuser on (also on min. power - 1/128). Sorry for the bad floral composition :)

(I just noticed: for some reason saturation in firefox appears to be much higher than supposed, blowing out detail in the edited version and giving a color harsher than intended. I can only think of color space issues, but why? it's all sRGB. Anyway, if your firefox shows unnatural color, download the image and it will look fine in any program.) UPDATE: fixed replacing the images with copies that don't have their usual color profile embedded, sRGB IEC61966-2.1. Any idea why?

As shot:enter image description here

After some editing :enter image description here

The editing was as follow:

  1. using curves, I assigned an RGB value of 20 to the darkest point of the petals, then a value of 245 for each channel to a light grey area of the background (bottom left)
  2. I reduced saturation just a bit
  3. and painted white the grey parts on a separate layer

Oh, a note: this experiment shows, IMHO, that just one light from below is needed for this kind of shot, as having a second light, even a weak one, causes loss in detail and makes it harder for the petals to have the translucent look we want.

Technical data for the shot above: DX Nikkor 35mm f/1.8 @ f/5.6, 1/200s, ISO 100. Tip: use maximum flash sync speed to exclude ambient light.

share|improve this answer
    
thank you! you made my day! –  publicRavi Jun 6 '12 at 15:41
    
@publicRavi - that's just too nice of you! –  MattiaG Jun 6 '12 at 15:45
add comment

This might be possible to do by putting the flower on a transcluent table (like this one) and lighting it from below. The article even suggests it by saying "She backlit each flower with a (...) strobe (...)."

Edit: I've tried to reproduce the effect. Having no flower petals, I resorted to a grape. Also, I have no transcluent table, so I taped a tissue to the back of a chair instead:

and the setup shot:

share|improve this answer
2  
That's what it looks like from the link that @mattdm provided. Two different peonies, both shot from below. Notice the slight blowout of the edges of the outer petals and the glowing yellow in the center....seems highly likely they were just lit from below. The caption on the pic even says "Exposing for 1/125 sec at f/16, Benoist shot both peonies at ISO 200" –  huzzah Jun 5 '12 at 19:46
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.