Orquid "Phoenix"

Orquid "Phoenix"

by ceinmart

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

The manual of the Canon TS-E 17mm F/4 states that metering only works when the lens tilt and shift are set to zero (in the same position as a standard lens would be). Logically this implies that the meter indicator in manual mode would be incorrect as well.

What techniques then would be recommended to meter with such lens? Does the light entering the lens depend on the shift and/or tilt positions? If you meter from a highlight the the lens and camera straight, would that be still valid after tilt, shift and the orientation adjusted? (Obviously for reflective surfaces the answer to the latter is no).

share|improve this question
add comment

1 Answer

up vote 10 down vote accepted

It is very simple: Metering does not work when the lens is shifted, metering does not work when the lens is tilted. The workaround is also very simple: Shoot in M mode. Adjust the exposure to your satisfaction with the lens untilted and unshifted. Then shift and/or tilt, and take the actual photo.

Note: It is the metering that is affected by tilt/shift, not the actual exposure. If 1/200, f/f5.6 is the correct exposure with tilt/shift set to zero, 1/200, f/5.6 is still the correct exposure when the lens is tilted and shifted.

share|improve this answer
1  
And, yes, this is brand-independent. I removed the Canon tag. –  Staale S Apr 28 '12 at 19:31
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.