Apples

Apples

by Garik

submit your photo


Picture of the Week Themes
Suggest and vote on themes

Please participate in Meta
and help us grow.

Tell me more ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.
up vote 3 down vote favorite

I shoot a lot of close-up photography and typically use the mirror up feature with a remote control. I tried doing double exposures using these functions and kept failing. Yesterday I switched to single shot and the mutiple exposure function worked fine. I just wanted to make sure that I wans't making some mistake. In short, multiple exposure does NOT work with the mirror up, right? Thanks! Tim

share|improve this question
In continuous high-speed and continuous low-speed release modes, the camera records all exposures in a single burst. Camera Manual - Page #153 – Alen Apr 14 '12 at 1:01

1 Answer

up vote 2 down vote

My understanding of pages 152-153 of your manual is that you have to capture the correct number of frames (2 or 3 as chosen in the menu) in order for the "multiple exposure" sequence to be complete.

As @alen mentions in his comment above, burst modes will mean those 2-3 frames are captured relatively quickly, but in other shooting modes, you still have to go through all the steps of acquiring a complete frame for each frame that makes up the multiple exposure.

For single shot, that simply means taking two pictures. The same applies in mirror lock-up mode BUT MLU requires two button presses to acquire one frame (see pg 83 of your manual for MLU details), so the process must be repeated for each subsequent frame required to complete the Multiple Exposure sequence. And it is a sequence, it is initiated and can be cancelled via the shooting menu. See pg 154 for "Interrupting Multiple Exposures".

share|improve this answer
As the acronym goes RTFM :) – Alen Apr 14 '12 at 2:25
Thanks for the responses. Yes, I'm making two complete exposures after selecting "2" in the menu. I made an error in my earlier post; I wrote "mirror up" (which is what happens), but I achieve that using the remote function--click to raise the mirror and click to make the expose. But remote release and continuous release are not available together, so far as I can tell from the dial. – Tim Apr 14 '12 at 11:10
@tim please update your post to reflect the actual question then, as it is very unclear what the issue is. Since we have actually answered your question as it is phrased, and that information could be useful to someone, you might even be better off asking a different question altogether. – Instantkamera Apr 14 '12 at 13:38

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.