Serene Life

by garik

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I see beautiful photos of beaches or rivers/streams where the water looks like frosted glass...

How is this effect achieved?

Is it a longer exposure?

share|improve this question
3  
It may help if you post an example, but it does sound like a long exposure shot (possibly with an ND filter to allow correct exposure in bright light)... Have a look at photo.stackexchange.com/questions/2126/… for some suggestions... –  forsvarir Mar 26 '12 at 13:31
    
Yeah; the question @forsvarir gives is basically the identical, although this one adds in beaches. –  mattdm Mar 26 '12 at 13:43

4 Answers 4

up vote 4 down vote accepted

As others have said, it depends a lot on what kind of effect you want on the water and how much light is available.

What I usually do is decide on how milky I want the water and then find out the time needed to get there. Note that the speed and volume of water impacts the result, so the thinner the stream/flux is the more time you need.

Here is a shot that required six seconds in order to achieve the effect I wanted. Fortunately the scene was under the trees on a heavily cast day and I wanted to use a smaller aperture (8.0 in a Canon compact) resulting in a bigger depth of field, otherwise there would be too much light for the shot:

Passing Water | Água passando

If you are shooting at night, you may use even longer times, 15 seconds for example, before overexposing the picture:

Hazy Rocks | Pedras enevoadas

Note that on such long exposures, if you want someone to be part of the scene, be sure they stand really still. Here again, 15 seconds were used to make sure the water was milky enough:

Beach Skirt | Beira de praia Meditation Over Blue | Meditação sobre azul

If, on the other hand, your scene is in plain daylight (by noon, even worse), you will certainly need a powerful ND filter, in order to allow the same 15 seconds. Here two of them were used, an external one with 9 steps and the camera built in, with 3 more steps:

Príamo Plano

share|improve this answer

Yup, that's really all there is to it.

But it takes some experimentation in each case, because the way the water moves is always different. So I've got a variable ND filter that I use. It's trial and error until I get an exposure that I like.

It's not necessarily best to just go for the longest exposure possible. If you go for too long, it'll start to look like ice.

I just this morning posted to flickr a photo I took at Kent Falls in CT on Saturday. I think I've got here about the longest exposure possible before it starts to look too "hard". This was 0.7". I did some others as long as 10", and those longer ones were too extreme. enter image description here

So the variable ND filter is good to dial-in the right amount of freeze. Although I guess you could also get control by changing aperture and ISO, if you didn't have a variable one.

share|improve this answer
2  
Want to share one of your 10" photos? It'd be great to see those two different results side-by-side. –  drewbenn Mar 26 '12 at 17:54

Is it a longer exposure?

Yes.

Use a tripod or rest the camera on a rock to get a steady shot and choose a longer shutter speed (coupled with a smaller aperture if necessary).

Experiment with different shutter speeds to get different effects.

share|improve this answer

I was experimenting with this recently. Here are some pictures of a small cascade in western Massachussetts last fall.

1/2 second:

1 second:

4 seconds:

Yes, I know some highlights got blown. This was mostly so I'd have a record of different tradeoffs with flowing water. The tradeoffs might be different with a larger waterfall like what Chris showed since the water should be moving faster. Looks like I need to do a bit more experimenting.

share|improve this answer
    
Get some neutral density filters to help lengthen your shutter speeds without blowing the highlights. –  John Cavan Mar 26 '12 at 23:50
    
@John: While it might be a good idea to get a ND filter, that wasn't the problem here. I could have exposed less. The sun was constantly going in and out of clouds, but the real problem was that I was focused too much on the water that I forgot to consider how bright the highlights were and expose at -1 or so to compensate for the exposure meter getting fooled. However, these pictures served their purpose well enough, which was to give me some idea of the time needed for diffent looks of flowing water. –  Olin Lathrop Mar 27 '12 at 23:28

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.