Lunch atop a (Springfield) skyscraper

Lunch atop a (Springfield) skyscraper
by andy-m                

Submit your Photo
Hall of Fame

Please participate in Meta
and help us grow.

Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I know there is already a question about EV, but it doens't quite answer my question. I understand EV as a relative measurement, 1 EV being one stop (doubling or halving the amount of light), but what is 0 EV? What does it mean when Nikon claims that a camera can autofocus in -2 EV?

share|improve this question
This is a duplicate of a question I asked, but I like the answers here better. – coneslayer Feb 13 '12 at 12:10
up vote 12 down vote accepted

The easy part is the absolute answer as usually defined.
Whether it's what Nikon or anyone else means is more problematic :-)

LV is related to the the light level falling on the subject.

EV is the light level inside the camera.
They are linked by the reflectance of the subject.

EV0 is the light level at the camera to achieve correct exposure with

  • 1 second of exposure at F1 when using ISO 100 film.


  • Any other equivalent setting

EV values are logarithmic so light level at EV8 = 2^8 x EV0 level = 256 x EV0 level.

So eg correct exposure at EV8 would be F16 at 1 second with ISO 100

So a given EV at the camera will have various LV levels depending on mean scene reflectance. [That trips off the tongue nicely :-) ].

Below is an EV chart, from this useful page

BUT a level of EV-2 would be correctly exposed at f1.4, 8s, ISO 100 - which is pleasantly surprising if the D800 can do it. (I think I saw that spec in the D800 announcement material few days ago).

enter image description here

Wikipedia is useful on LV & EV but takes some wading through.

Table 2 shows full moonlight as EV-2 to EV-3 which is consistent with the above table.

I attempted to equate the above to illuminance levels in lux (lumen/m^2) - which requires assumptions on reflectance and opens a large pandora's box. The Wikipedia discussion of calibration constants here on the "light meters" page rapidly shows that this is a well trodden battle ground with no one answer.

eg cf

  • ISO 2720:1974 recommends a range for K of 10.6 to 13.4 with luminance in cd/m². Two values for K are in common use: 12.5 (Canon, Nikon, and Sekonic1) and 14 (Minolta,[2] Kenko[2], and Pentax); the difference between the two values is approximately 1/6 EV.

It seems about right to say that you get about EV0 at the camera with 1 lux of illumination and a typical subject reflectance mix. Very bright Moonlight is typically around 0.5 lux giving EV -1 by the above assessment which is only one EV off the statement cited previously - which is probably close enough to exact in this sort of area.

Other useful musings:

Wikipedia - luminance

Ken Rockwell - EV & LV - notes that Ken's definion for LV0 is the same as what I said above for Ev0. I think my reference is the more correct one but, I may be wrong :-). He directly equates LV and EV at ISO 100 which seemeth not right.

Sekonic lux to EV table - they SHOULD know what they are talking about :-). They ay Ev0 is 2.5 Lux or about 1 EV brighter than I said above. They say:

                       EV    Lux   Foot-Candle

                      - 1   1.25    0.12  
                      - 0.5  1.75   0.16  
                        0    2.50   0.23  
                        0.5  3.50   0.33  
                        1    5.00   0.46  
                        1.5  7.00   0.66  
                        2    10.00  0.93  
                        2.5  14.00  1.31  
                        3    20.00   1.86  
share|improve this answer
Impressive and clear answer, thank you! – SoftMemes Feb 13 '12 at 20:29

To understand what EV 0 and EV -2 mean, perhaps it is useful to understand what it is not. It is not complete darkness or the absence of light. EV 0 is defined as f/1 @ 1 second. When manufacturers use the term to define an illuminance level, it is usually assumed that the amount of light is what is needed to produce a nominally correct exposure for that EV with a film/sensor sensitivity of ISO 100. Since the EV scale is logarithmic and each step is double or one half depending on which direction you are stepping, it means that each step is an additional power of 2.

Negative values in a exponential expression simply mean the number is the inverse of the same number raised to the same positive power. If 2^3=8, then 2^-3=1/8. Since an EV number is based on EV 0 raised to a power of 2, then negative EV numbers indicate a fraction of the base value, rather than a multiple of the base value as positive numbers indicate. If EV 3 requires 8 times as much light as EV 0 (2³=8) to produce the same exposure, then EV -3 requires 1/8 the light of EV 0 (2^-3=1/2^3=1/8) and EV -2 requires 1/4 the light of EV 0 (2^-2=1/2²=1/4) to produce the same exposure.

share|improve this answer
So how much light does EV0 require? – mattdm Dec 7 '13 at 2:23
That depends on the reflectance of your subject and who you ask. As Russell McMahon discusses in his answer, it is usually somewhere in the neighborhood of 1 to 2.5 Lux. – Michael Clark Dec 7 '13 at 10:59
Where is the ISO 100 coming from? The wiki of EV states that it's independent of ISO. – Saaru Lindestøkke Dec 7 '13 at 12:36
From deeper in the same wiki article you linked: Strictly, EV is not a measure of luminance or illuminance; rather, an EV corresponds to a luminance (or illuminance) for which a camera with a given ISO speed would use the indicated EV to obtain the nominally correct exposure. Nonetheless, it is common practice among photographic equipment manufacturers to express luminance in EV for ISO 100 speed, as when specifying metering range (Ray 2000, 318) or autofocus sensitivity. (cont.) – Michael Clark Dec 7 '13 at 12:49
(Cont.) And the practice is long established; Ray (2002), 592) cites Ulffers (1968) as an early example. Properly, the meter calibration constant as well as the ISO speed should be stated, but this seldom is done. – Michael Clark Dec 7 '13 at 12:49

According to this EV 0 is defined as f/1.0 at 1 second (@100 ISO - see comment)

EV -2 equates to an exposure with an f/1.4 lens at 8 seconds, or f/5.6 at 2 minutes! Very dim indeed.

share|improve this answer
That is what that page says BUT note that that gives you an camera setting but not a light level per se. To turn that into a light level you add "at ISO 100" (with the implied prefix "The light level which gives correct exposure at ...") – Russell McMahon Feb 13 '12 at 10:27
@Russell, yes I did see that article and was confused as just a shutter speed and aperture would not get an absolute light level, but EV is still being used to suggest one. – SoftMemes Feb 13 '12 at 16:18
@Russell McMahon, yes thanks I meant to mention that it must assume ISO 100. – MikeW Feb 13 '12 at 18:34
@SoftMemes That's because Exposure Value (EV) is, strictly speaking, not a light level at all. It is an expression of equivalent shutter/aperture values. EV 0 is the same regardless of the ISO sensitivity of the film/sensor or how much light is in the scene. Only when you include the condition of correct exposure (whatever that is) does any light level equate to a specific EV at a specific ISO. – Michael Clark Jan 1 '14 at 21:09

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.