Forgotten in its old age

by Aditya

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have a Pocket Wizard TT1 and TT5 which work fine. I mount the TT1 on the camera shoe and the TT5 fires my remote flash ETTL fine.

I now want a focus assist light, so I set a flash (580, 430 or ST-E2) on the TT1 but there is no focus assist light. If I put the flash directly on the shoe of the camera I get focus assist.

I measured the 5 leads on the shoe of the camera:

 1
2 3
4 5

1 - is the main lead, it is at 0 when autofocusing

2, 3, and 5 show up with a volt meter; 4 stays 0 when autofocusing.

Measuring the top of the TT1 none show any activity during autofocus. I tried this on another TT1 and both had the same issue. Has no one run into this? It's driving me crazy.

share|improve this question

1 Answer 1

The problem was tackled some time ago in forum of Photography On The Net, where it was suggested that a test shot is needed before AF assist will start working.

share|improve this answer
    
At first I was like no way ... I took a couple of shots and the focus light still didn't work. Then I thought "well how can it set itself if there is no other flash?" I then hooked up the tt5 with a flash and yes but after another two shots the focus assist started working. I'll have to look into this, but my guess is there has to be another flash hooked up to the tt5 and fired before the the tt1 will set it's levels and then start firing the focus assist light. Thanks! –  Kyle Hailey Aug 29 '11 at 16:44

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.