Time to be with your loved ones

Time to be with loved ones

by sat

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I'm trying to enable auto-ISO on my dad's Nikon D5100. There is an "Auto" option for "ISO sensitivity" in the menu, logically-enough under "ISO sensitivity settings"). This works fine in the Scene modes, but with P, A, S, or M, I get:

This option is not available at current settings or in the camera's current state.

Surely auto-ISO is not only available in the preprogrammed modes. How do I enable it?

Update: there is a separate section to "ISO sensitivity settings" below the main choice. That is only available in the P, S, A, and M modes, and has "Auto ISO sensitivity control". I've set this to ON, but empirically it's the hard-set value above that actually gets used. What is this separate setting, why is it separate, and (most of all) why doesn't it work?

share|improve this question
add comment

2 Answers

up vote 2 down vote accepted

Auto ISO isn't available in the non-scene modes per se.

The ISO Sensitivity Auto control option you mention in the latter part of your question is essentially 'Auto Pro'. You'll note in the menu that you can set a max ISO and a minimum shutter speed.

When ISO Sensitivity Auto control is enabled, the camera will endeavour to use the ISO you set, but will increase the ISO automatically (up to your defined max) if it's not achieving the shutter speed set in the menu. If you actually take a shot then check the settings used on the LCD, you may well see that the ISO will be a different value, and shown in red, to indicate that the camera took over and adjusted it automatically.

share|improve this answer
1  
Ah, I got it. That's a bit inconvenient compared to the Pentax implementation, where it just works in all modes — you set the min/max ISO and the "aggressiveness" with which it is increased, and the camera sets the target shutter speed based on focal length. (It'd be nice to have a hard minimum for that too, though.) The Nikon approach seems like it's pretty decent for aperture-priority mode, which I'm encouraging my dad to default to anyway, but seems less useful in the other modes. –  mattdm Aug 28 '11 at 19:20
    
And I'll set the custom button to change ISO, which will make changing that easier. Kind of a shame, because with the awesome sensor in the D5100 I wanted to tell him "now you don't really have to even think about ISO". –  mattdm Aug 28 '11 at 19:23
    
Then you should have told your dad to buy a Pentax. Somebody has to! ;) –  ElendilTheTall Aug 28 '11 at 21:55
1  
I did, but he doesn't always listen to me. :) Sorry, I wasn't trying to be partisan or anything with those comments. Honesty I wish everyone would open-source their in-camera UI so this sort of thing could be made to work in a flexible way on any brand of camera. –  mattdm Aug 28 '11 at 23:00
    
@mattdm sorry for the silly question: do you mean that Pentax as a sortof open source UI? –  clabacchio Jun 4 '12 at 11:40
show 2 more comments

Charge the battery and you will be fine. The Nikon folks should be beaten to death for not addressing this. If the battery is weak or near dead, you will get that message when trying to delete a photo or even change an ISO setting. Why Nikon doesn't address this or why all of the camera nerds out there don't say anything about this, I don't know why.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.