Forgotten in its old age

by Aditya

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

Why is it that 35mm film is always supplied in a small plastic canister, when the film itself is enclosed in a hard, opaque carapace itself. Now, potentially for high-sensitivity films like Ilford Delta 3200 this would make sense, as it comes with an (ostensibly) light-proof canister. But then again, lower sensitivity films (eg: Neopan 100) is supplied with a light translucent container.

But then again, it seems likely that there is a good reason--perhaps to keep out excess moisture, or other potential harmful airborne substances.

Thanks,

share|improve this question
19  
So that we have a convenient place to put things like paper clips, small screws, etc. –  Evan Krall May 23 '11 at 9:08
1  
They are perfect for coin storage. The top canister cap also works perfectly as a spare cap for Pentax DA 40 mm f/2.8 Limited. –  sastanin May 23 '11 at 9:20
3  
@Evan and @jextee - Even better as salt and pepper holders for camping. :) –  John Cavan May 23 '11 at 12:43
3  
What is the point of film when we have memory cards? –  dpollitt May 23 '11 at 13:37
2  
@Evan Krall - I can certainly fit a lot of memory cards into a film camera, it's making them do something useful that's the hard part. –  Fake Name Sep 7 '11 at 2:00

5 Answers 5

I think, like you said, the canisters are made for protecting the film from external influences. The plastic casing of the capsules is not completely shut. Dust, small water drops and light might get inside without an extra casing.

share|improve this answer
3  
yup, helped when I got caught in a dust storm some 25 years ago. Lens destroyed, film was fine (camera somehow survived). –  jwenting May 23 '11 at 11:24
1  
As well as protecting from dust and moisture, bear in mind that the film casing is rather fragile. Quite gentle crushing can crack the seal and fog the film. If the film is in a soft plastic canister it can take much more punishment. –  Max Sang May 24 '11 at 16:11

If you ever used a reloadable film cassette, then you know how easily those things fall apart. When you take apart a one-use cassette in the darkroom, you have to use a church key or special tool to take it apart without hurting yourself. You end up with a couple pieces of bent metal in the process. A reloadable cassette will come apart just by pulling the top off — it is in fact harder to take the top off a canister than it is to disassemble a reloadable cassette, especially once you've used it a half dozen times.

share|improve this answer
    
I've used a Mamiya 645 with a 220 and 120 film backs, and of course, the film comes pretty much naked, except for the paper leader/ trailer. (not that I'm all that careful when it comes to re-loading / spooling it into the camera. That said, I meant the little plastic canisters that the film cassettes come in, rather than the cassettes. Still, thanks for the interesting post. –  C. Storey May 24 '11 at 9:53
1  
Hm, I was saying that the canisters are necessary because the cassettes fall apart so easy. –  Dietrich Epp May 24 '11 at 14:37
    
Understood. Thanks. –  C. Storey May 26 '11 at 12:44

This was the subject of a long-running letter thread in the Guardian newspaper a couple of years back. You'd be amazed what people use them for. :)

share|improve this answer

You can use the translucent ones as diffusers for pop-up flashes. Take the lid off, cut a notch out of one side, place it on the flash and put the lid back on. Voila! Softened flash, no more Coccoon shots.

share|improve this answer
    
It should be noted that this doesn't directly diffuse your flash -- it sprays it in more directions so it's more likely to bounce off ceilings and walls. –  Evan Krall May 23 '11 at 22:11
    
From the Chambers Online Dictionary: diffuse verb (diffused, diffusing) tr & intr to spread or send out in all directions. –  ElendilTheTall May 24 '11 at 7:34
1  
Fair enough. This doesn't directly soften your flash -- it diffuses it, and when near reflective surfaces (like walls and ceilings), the reflections soften it. Try this out in the open, and you'll find that nothing really happens except your flash has to use more power to hit your subject. –  Evan Krall May 25 '11 at 6:12

IR film has/should to be loaded/unloaded in complete darkness, so thus the film needs to be transported in canisters until such a time as you need to use it - at which point you have to load the camera in a darkened room, or use a portable dark bag.

share|improve this answer
1  
That is only Kodak HIE (now discontinued). Other IR film stocks don't have this issue because they have the anti-fogging layer it was missing. –  cabbey Sep 7 '11 at 17:13

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.