Paris

by Jon

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

When using manual focus or back focus on D60, I sometimes zoom in the lens, set the focus, and then zoom out. Does changing the focal length (zooming out), also change the focus?

In case the answer depends on the lens, I use Nikkor 55-200 and 18-55.

share|improve this question
    
Thank you everyone for the replies. –  Aditya Apr 10 '11 at 16:25
    

3 Answers 3

up vote 15 down vote accepted

It's not supposed to, but usually does.

The basic difference between a "varifocal" lens and a "zoom" is that a zoom stays in focus as the focal length changes. That's typically done by moving different lens elements simultaneously. The problem is that it's (at least normally) done mechanically, so manufacturing tolerances and wear in the lens prevents it from working quite perfectly in most cases.

There have been a few lenses that were poorly designed (at least in this respect) so the changes in focus were consistent, but in most cases it's more about mechanical tolerances, so it's mostly specific to a particular lens, not a design in general.

share|improve this answer

In most cases, yes - zooming does change focus. There are some exceptions, google up on "parfocal" lenses.

share|improve this answer
1  
Good answer but I would not say most. It does depend on the lens as you said. Some manufacturers have been more systematic at making their lenses parfocal, so the percentage varies greatly by brand. –  Itai Apr 9 '11 at 19:10
2  
I would say that the most common lenses - that is, kit lenses (such as the Canon 18-55mm f3.5 - 5.6) - are certainly not parfocal. –  nchpmn Apr 10 '11 at 11:25
    
See also the answers here for details photo.stackexchange.com/q/14949/27832 –  feetwet Sep 11 at 21:16

The technique of zooming in to check focus and then zooming back out to the desired focal length is common in the video industry, where lenses do tend to maintain the same focus distance across the zoom range. In the still photography world, however, lenses may shift the focus distance as you zoom in and out.

This makes sense from the standpoint that in still photography you will generally have time to refocus between shots, but when recording video the subject must be kept in focus the entire time.

See http://notesonvideo.blogspot.com/2010/06/video-terms-parfocal-lens.html for further reading.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.