Time passes by

by clabacchio

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I'm shopping for a 70-200 F/4 USM IS L, and took a few test shots with it.

Here's a full resolution jpeg, and a 100% crop with a focus point highlighted.

It was shot handheld with IS on at 70mm / F4 / 1/400 sec.

In-camera picture style was set to Sharpening (3).

The image is NOT sharp as far as I can tell.

I'm I being unrealistic in my expectation from the lens that gets the best reviews all over the place?

share|improve this question
3  
I don't think that's a full resolution JPEG, it's not even 2 megapixels. –  Lyman Enders Knowles Apr 3 '11 at 22:20
    
i've uploaded the full-res image to another host, i guess tinypic downsized the image –  roman m Apr 4 '11 at 0:04
    
Try uploading directly from the question edit form --- you should be able to upload a full-res picture with no hassles. –  Evan Krall Apr 4 '11 at 2:43

2 Answers 2

up vote 9 down vote accepted

When performing a test to determine X its best to remove all the variables you're not testing for.

If you're wondering about the sharpness of your lens:

  • Shoot on a tripod
  • Use manual focus with live view for critical focus
  • Use mirror lockup
  • Shoot in RAW
  • Use a low ISO, at a reasonable shutter speed
  • Turn IS off

The problem with your example is it looks like your focusing was off (the 'B' looks much more in focus) which could mean you focused and then moved the camera slightly, the AF mis-focused because of a myriad of reasons, in camera processing did something weird, your body has back focusing problems...

Some of those things are your fault, some of them are the camera's fault and some of them are both your faults but if you want to determine where the cause of the sharpness problem is you need to narrow down the variables and test each thing individually.

share|improve this answer
    
good recommendations, to which I would add - photograph a flat surface which is square on to the lens axis. –  labnut Apr 3 '11 at 22:51
1  
and a remote shutter release if you can get one... –  Miljenko Barbir Apr 5 '11 at 5:06

That lens tests very highly for sharpness, even at its widest zoom and at widest aperture.

For a regular zoom lens I'd normally say don't get too excited about its perfromance wide open at the wide end, but with this lens it really should be very good.

My thoughts are:

  • Possibly a focus issue. This is the most likely reason. Try overriding the autofocus. Choose a particular part of the image you want to be in focus, as the depth of field is fairly narrow at that focal length and aperture.

  • Might as well put it on a tripod. This will also help ensure that you can focus and shoot without moving in between. Also, it's a heavy lens, so you may as well lock it down.

share|improve this answer
    
+1 for providing a good reference –  labnut Apr 4 '11 at 7:05

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.