Forgotten in its old age

by Aditya

submit your photo


Hall of Fame
View past winners from this year

Please participate in Meta
and help us grow.

Take the 2-minute tour ×
Photography Stack Exchange is a question and answer site for professional, enthusiast and amateur photographers. It's 100% free, no registration required.

I have been trying to use my 18-55 kit lens as a macro but have no idea how to go about it. Do I need an adapter to mount the lens reversed on the camera?

Also, is it possible to use canon 50mm f/1.8 as macro by reversibly mounting it?

Is it possible to reverse any lens to function as a macro lens?

share|improve this question
1  
Very similar question: photo.stackexchange.com/questions/642/… –  asalamon74 Mar 31 '11 at 7:07
    
There appears to be 3 questions here –  ChrisFletcher Jul 20 '11 at 13:24

5 Answers 5

If you own both of the two lenses you mentioned, just keep one on the camera, then hold the other (reversed) in front of it (you can tape the two lenses together if you want).
Doing this you'll get extreme magnification; on the other hand, depth of field will be close to none. You'll probably want to avoid getting most of the image black so

  • keep the aperture of the reversed lens wide open blocking the small lever in the mount with a piece of paper or something similar
  • if the on-camera lens is the zoom (which seems to be better, at least in my experience), zoom it to the longest focal.

Switch autofocus off and don't bother with manual focus, you won't need it as moving a millimeter will change what's in focus. As this technique reflects some problems of a huge focal length, it's better to have enough light to use the camera in shutter priority with a short time (e.g. 1/300 s).

You could just reverse ONE lens, buying a reverse ring or making one but not all cameras allow you to shoot w/o a lens on, and/or the meter wouldn't work.

share|improve this answer
    
there is a lens coupling filter ring that lets you mount a reversed lens on top of a normally mounted lens. It is cheap an better than taping (alignment, etc.). –  ysap Mar 31 '11 at 16:51

To firmly assemble the two lenses, i used two P series Cokin adaptor rings, so i can put a rubber band around those two rings, and the lenses are assembled temporarly and without a reversing ring :)

share|improve this answer
1  
The link is no longer valid. –  Seth Johnson Jul 18 '11 at 16:25
    
@Seth, it works for me but I'm pretty sure linking directly to Flickr images is against the ToS. It's definitely not practical in the long term. –  ChrisFletcher Jul 20 '11 at 13:25
    
@Chris: the OP has fixed the link since I posted my comment. –  Seth Johnson Jul 20 '11 at 13:47
    
I removed the link. Google is our friend. –  Laurent Jégou Jul 21 '11 at 9:50

@ElendilTheTall has written an excellent article which describes all-you-need-to-know about reverse macro, you should read through his article: http://photo.blogoverflow.com/2011/07/take-macro-shots-like-this-for-less-than-the-cost-of-a-pizza/

share|improve this answer

Yes, you need a reversing ring to mount any lens backwards. Theoretically any lens can be reversed.

share|improve this answer
1  
But it is only useful if the lens aperture can be set manually, i.e. has an aperture ring. As far as I can see, the 18-55 has no aperture ring (I don't own a Canon) and this may also be true for Canon 50mm f1.8. –  labnut Mar 31 '11 at 10:16
    
Hey, i didn't say if it was useful or not: he asked if he needed an adaptor to reverse mount his lens, I said yes. In any case, you still have some control over aperture as reversing the lens allows access to the lens' aperture lever. It's not perfect, but you're reversing a lens - it's a jury-rigged macro solution at best. –  ElendilTheTall Mar 31 '11 at 11:45
1  
@labnut - saying "it is only useful" is a too strong statement. I had some nice shots with a wide open reversed kit lens. It really depends on your subject. –  ysap Mar 31 '11 at 16:49
4  
18-55 doesnt have aperture ring but you can set an aperture, keep the dof preview button pressed while taking off your lens. this will keep the aperture fixed. normally reverse lens techniques require smaller apertures and wide opens are too shallow and often become almost unusable and very troublesome focusing properly. –  fahad.hasan Apr 17 '11 at 4:13
    
@Shutterbug, that is a useful tip. –  labnut Apr 17 '11 at 8:29

If you don't want to reverse the lens, there is something called a macro extension tube. It fits between your camera and the lens and lets you use a non-macro lens for macro photography. Very useful for photographers on a budget. More expensive ones have electronics built in that let you change the aperture size.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.