I have a Nikon D7000 and a SB-700 flash and am trying to set up the following:
- Manual mode (F11, 1/250)
- Manual flash (1/64)
- Bracketing with flash only +- 1 stop, i.e. one picture at flash power 1/64, one at 1/32 and one at 1/128.
I have the flash set up on the camera with a TTL cable (so should be equivalent to having it attached directly to the camera). I can set manual flash power easy enough on the flash itself, and I can set the D7000 to bracket with flash only in TTL mode, but have not found a way of bracketing around a specific flash power.
Is this possible and if so how do I do it?